Hima

You are here:
  1. Home
  2. Hima
  3. Page 4

Hima F3333 Safety-Related Input/Output (I/O) Module

  • Technical Specifications:
    • I/O Channels: Typically includes 8 digital input channels and 8 digital output channels (configurable for specific applications), supporting both sinking and sourcing output configurations.
    • Input Specifications: Digital inputs accept 24V DC signals, with a response time of less than 10ms (for safety-critical signals) and a maximum input current of 5mA per channel. Inputs are protected against reverse polarity and overvoltage (up to 36V DC).
    • Output Specifications: Digital outputs provide 24V DC, with a maximum current rating of 1A per channel (or 4A total for the module) and short-circuit protection to prevent damage from wiring faults.
    • Safety Certification: Complies with IEC 61508 SIL 2/SIL 3 and IEC 61511, ensuring compatibility with safety loops requiring mid-to-high safety integrity levels.
    • Operating Environment: Operating temperature range of -20°C to +60°C, and humidity tolerance of 5% to 95% (non-condensing), suitable for harsh industrial conditions.
    • Communication: Interfaces with Hima SIS controllers via a proprietary backplane bus (e.g., Hima’s Safety Bus) for high-speed data transmission (up to 100Mbps).

Hima GMP232 Serial Communication Interface Module

  • Technical Specifications:
    • Serial Port Configuration: Features one or two RS-232 ports, supporting data rates from 300 bps to 115200 bps (configurable via software) to match different device requirements.
    • Signal Standards: Complies with EIA/TIA-232-F standards, supporting full-duplex communication with hardware flow control (RTS/CTS) and software flow control (XON/XOFF) options.
    • Operating Voltage: 24V DC (±10% tolerance), with a typical current draw of 50mA, ensuring compatibility with standard industrial power supplies.
    • Safety and Compliance: Meets IEC 61010-1 (safety for electrical equipment for measurement, control, and laboratory use) and IEC 61326-1 (EMC requirements for industrial control equipment).
    • Physical Dimensions: Compact design with dimensions approximately 100mm (length) × 50mm (width) × 25mm (height), suitable for installation in 19-inch racks or small control cabinets.

Hima H4135 Safety Controller Module

  • Technical Specifications:
    • Processing Power: Equipped with a high-performance microprocessor capable of handling complex safety logic (e.g., interlocks, trip conditions) with a processing cycle time of less than 100ms, ensuring rapid response to process deviations.
    • Memory Capacity: Includes non-volatile memory (typically 128MB Flash) for storing safety programs and configuration data, and volatile memory (64MB RAM) for real-time data processing.
    • Safety Integrity Level (SIL): Certified for IEC 61508 SIL 3 and IEC 61511 SIL 3, making it suitable for the most safety-critical applications.
    • Communication Ports: Features multiple built-in communication ports (e.g., Ethernet, Profinet, Modbus) for connecting to I/O modules, human-machine interfaces (HMIs), and plant-wide control systems (DCS).
    • Power Requirements: Operates on 24V DC (18V DC to 32V DC) with low power consumption (typically 15W), reducing energy usage in industrial setups.
    • Environmental Ratings: IP20 protection class for the module itself (when installed in a closed cabinet), and operating temperature range of -10°C to +55°C.

Hima L17089FF1

  • Product Introduction: The Hima L17089FF1 is a specialized module designed for integration into Hima’s safety instrumented systems (SIS), focusing on reliable data transmission and interface compatibility with other system components. It is engineered to meet strict industrial safety standards, ensuring seamless and secure communication between different parts of a safety-critical setup, which is essential for maintaining operational integrity in high-risk environments.

HIMA F8627X Industrial Safety Communication Module

Safety Programmable Logic Controller (PLC) Module

Technical Specifications
  • Series: Part of the HIMA H400 or H500 series (exact series may vary based on configuration)
  • CPU Architecture: High-speed, fault-tolerant processor optimized for real-time safety logic execution
  • Memory: Integrated program and data memory with battery-backed or non-volatile storage for safety-critical data
  • Input/Output (I/O) Handling: Supports connection to HIMA I/O modules via secure backplane or fieldbus communication

HIMA F3DIO20/802–Digital Safety I/O Module

Technical Specifications

  • Power Supply: It is powered by 24V DC, with a tolerance of - 15% to +20%.
  • Input Current: The maximum load current can reach 8A, and the idle current is about 0.4A at 24V. An external 10A time - lag (t) fuse is required.
  • Digital I/O Channels: It has 20 digital input channels and 8 digital output channels.
  • Communication Interface: It is equipped with 2 RJ - 45 Ethernet interfaces, supporting 10Base - T/100Base - TX, and has an integrated switch.
  • Operating Temperature Range: It can work normally in the temperature range of 0°C to +60°C.
  • Storage Temperature Range: The storage temperature range is - 40°C to +85°C.
  • Protection Level: The protection level is IP20.
  • Size and Weight: The specific size information is not clearly given, but it is a compact - designed module, weighing only 0.1 kg.

HIMA F3315 - Digital Input Module for Building Automation

HIMA F3315 - Digital Input Module for Building Automation

The HIMA F3315 Digital Input Module is specifically designed for building automation systems. It offers reliable digital signal input capabilities, making it ideal for industrial environments requiring high accuracy and robust performance.

HIMA F3224 16-Channel Digital Input Module

HIMA F3224 16-Channel Digital Input Module

The HIMA F3224 is a 16-channel digital input module designed for industrial control systems. It ensures reliable data acquisition and is ideal for applications requiring precise monitoring and control.

HIMA F8652X Genuine Module Card for Industrial Automation

HIMA F8652X Genuine Module Card for Industrial Automation

The HIMA F8652X is a genuine module card designed for advanced industrial automation systems. This module card supports digital input functionality, with a maximum operating voltage of 24V DC and an output frequency of 5 kHz. It is certified for use in critical applications requiring high reliability and safety standards.