ABB

You are here:
  1. Home
  2. ABB
  3. Page 3

ABB PM511V16 3BSE011181R1 – Processor Module

  • Technical Specifications
    • Processor Type: PowerPC 603e or PowerPC 750, with a main - frequency of up to 800 MHz.
    • Operating Voltage: 24V DC.
    • Output Power: The maximum output power is 16W.
    • Working Temperature Range: -20°C to +60°C.
    • Storage Capacity: 2MB flash memory and 256MB SDRAM.
    • Communication Interface: Support Ethernet, serial port (RS - 232/RS - 485), Profibus DP, CANopen, EtherCAT, etc.
    • I/O Points: 16 digital inputs and 16 digital outputs, 4 analog inputs and 4 analog outputs.
    • Size: 230mm x 170mm x 65mm.
    • Protection Level: IP65.
    • Installation Method: DIN - rail installation.
    • Weight: About 1.5 kg.

MOOG D136-001-007–MSC I Motion Controller

Technical Specifications

  • Power Supply: Supports 24 VDC power supply, with a current of 10 A. Some models can also use 48 VDC input, and the output voltage is 0 - 10V DC.
  • Processor and Memory: Equipped with a 40 MHz CPU, 4 MB flash EEPROM, and 2 MB RAM.
  • Task Cycle Time: The minimum task cycle time is 400 microseconds.
  • Input/Output Channels: It has 16 voltage or current inputs, with a measurement range of ±10 V or ±20 mA; 4 voltage outputs, with an output range of ±10 V and a maximum output current of 5 mA; and 1 reference voltage output of +10 V. Besides, there are 8 analog inputs, 2 analog outputs, all with configurable range and 16 - bit resolution, and 8 digital I/O.
  • Communication Interface: It supports CANopen, EtherCAT, Profibus DP V1 (optional), and also has RS485 interface, 2 x TIA/EIA 232, and Ethernet interface.

ABB PM891K01 3BSE053241R1–Central Processing Unit for System 800xA

  • Technical Specifications
    • Processor Architecture: It adopts PowerPC 604e architecture, and some models are equipped with a 450 MHz MPC8270 processor. There are also versions with ARM Cortex - A53 quad - core 1.9 GHz processors.
    • Memory: It usually has 128 MB RAM and 4 MB flash memory, and some high - end models are equipped with 2 GB DDR4 RAM and 4 GB eMMC Flash (3.2 GB available to users).
    • Communication Interface: It supports RS - 232, RS - 485, and Ethernet interfaces. There are 2 Ethernet ports (10/100 Mbit/s or Gigabit Ethernet), and some models are also equipped with 1 USB 3.0 port.
    • Backplane Bus: Some models support ABB AF600 backplane bus with a bandwidth of 600 Mbps, which is downward - compatible with AF400.
    • Power Supply: The power supply is 24 V DC, with a range of ±30%, and the typical power consumption is 7.5 W.
    • Operating Temperature: The operating temperature range is generally - 25°C to +60°C, and some models can reach - 25°C to +70°C.
    • Size and Weight: The size is about 102.5 mm×102.5 mm×32 mm, and the weight is about 2.1 kg.
    • I/O Points: It can support up to 64 I/O points.

ABB PFCL201C – Pressductor PillowBlock Load Cell

  • Technical Specifications
    • Measurement Range: Available in multiple ranges, such as 5kN, 10kN, 20kN, and 50kN. Taking the 20kN model as an example, its measurement range is 0 - 20kN (20,000N).
    • Accuracy: Generally, it can reach ±0.2%FSO, and some models can reach up to ±0.1%FSO.
    • Non - linearity: ±0.2%FSO or better, and some high - end models can reach ±0.05%FSO.
    • Output: Common outputs include 2mV/V, 4 - 20mA, 0 - 10V, or RS485.
    • Bridge Resistance: Usually 350Ω.
    • Power Supply: The input voltage range is 12 - 24V DC.
    • Operating Temperature: -20°C to +80°C or -40°C to +85°C for some models.
    • Humidity: 5% to 95% non - condensing.
    • Protection Level: IP67, which can work in harsh environments.
    • Size: Approximately 100mm×50mm×25mm.
    • Weight: About 0.8kg.
    • Overload Capacity: For example, the 50kN model has an overload capacity of 500kN.

ABB BCU-02

  • Technical Specifications
    • Input Voltage: 24 V DC.
    • Operating Temperature Range: -20°C to +60°C.
    • Communication Interfaces: RS485, Ethernet, Modbus TCP, etc.
    • Protection Level: IP20 or IP65 (some models).
    • Size: 122 x 260 x 25 mm (standard size).
    • Weight: 1.5 kg.
    • Processing Speed: 30 Hz.
    • Storage Capacity: Supports SDHC card storage.

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications

  • Detecting Range: It can detect flames within a range of 30 feet (about 9 meters).
  • Response Time: The response time is ≤2 seconds, which can quickly detect the presence of flames.
  • Power Supply Voltage: It is powered by 24V DC.
  • Working Temperature Range: It can work normally in the temperature range of - 20°C to + 85°C.
  • Storage Temperature Range: The storage temperature range is - 20°C to + 85°C.
  • Humidity Range: It can adapt to the humidity range of 5% - 95% (non - condensing).
  • Protection Level: The protection level is IP66, which has good dust - proof and water - proof capabilities.
  • Output Signal: It provides normally open/normally closed contacts and 4 - 20mA current signals, which are convenient for connecting with other devices.
  • Installation Method: It supports DIN rail or embedded installation, which is flexible and convenient.
  • Size: The size is 100mm x 100mm x 50mm, which is compact and does not take up much space.

ABB RET670 1MRK004816-AC – Detailed Information

Technical Specifications

  • Rated Voltage: DC24V or AC300V.
  • Rated Current: 10A.
  • Number of Contacts: 8 normally - open contacts and 8 normally - closed contacts.
  • Operating Temperature Range: -20°C to 55°C.
  • Humidity Range: 5% to 95% non - condensing.
  • Dimensions: 110mm x 70mm x 35mm.
  • Weight: 0.3kg.
  • Communication Protocols: Support standard protocols such as IEC 61850, Modbus, and DNP3.
  • Protection Level: IP67.
  • Mounting Method: Panel - mounting.

ABB 129740-002 – Detailed Technical Sheet

Technical Specifications

  • Power Supply: The input voltage range is 12 - 48VDC, the output voltage is 5VDC, and the maximum output current is 10A with an efficiency of more than 90%.
  • CPU: Equipped with a 32 - bit 800MHz RISC CPU.
  • Dimensions: 170mm x 105mm x 32mm.
  • Weight: Approximately 120g.
  • Input Types: Support various input types, including voltage, current, and digital signals. The input can process 0 - 30VDC signals.
  • Output Capacity: The digital output can switch a load of up to 2A.

ABB 1SAP240500R0001 – DC523 Digital Configurable I/O Module

Technical Specifications

  • Power Supply: 24V DC.
  • Input Voltage: 0 to 30V DC.
  • Output Voltage: 24V DC.
  • Output Current: 0.5A.
  • Protection Level: IP20.
  • Maximum Hardware Counter Input Frequency: 50kHz.
  • Number of Digital Configurable I/Os: 24.
  • Number of Hardware Counters: 2.
  • Mounting Method: Din - rail mounting, TH35 - 15 (35 x 15 mm mounting rail) according to IEC 60715.
  • Mounting Position: Horizontal or vertical (with power derating when vertical).
  • Dimensions: Net width 67.5 mm, net height 76 mm, net length 62 mm.
  • Weight: 0.14 kg.

ABB PM665 3BDS005799R1 – Processor Module

Technical Specifications

  • Input Voltage: 220V AC.
  • Output Voltage: 24V DC.
  • Maximum Current: 10A.
  • Operating Temperature: - 20℃ to +60℃.
  • Storage Temperature: - 40℃ to +85℃.
  • Dimensions: The net depth/length is 252 mm, the net height is 273 mm, and the net width is 40 mm.
  • Weight: 2.04 kg.
  • Rohs Status: Compliant with EU directive 2011/65/EU.

ABB UFC760BE01 3BHB007030R0001 – Industrial Control Module

Technical Specifications

  • Power Handling Capacity: Up to 700 kW.
  • Operating Voltage: 380 VAC.
  • Frequency Range: 400 Hz.
  • Inverter Efficiency: Over 98%.
  • Control Modes: Vector control, open - loop control.
  • Protection Class: IP21.
  • Cooling System: Natural convection cooling.
  • Operating Temperature: - 20 °C to + 50 °C.
  • Dimensions: 480 mm x 250 mm x 250 mm.
  • Weight: Approximately 35 kg.

ABB AFP9075355 – UNITROL 1020 Digital Excitation System

1. Core Architecture & System Composition

  • AFP9075355 Role: High-performance microprocessor module acting as the computational core within UNITROL 1020 systems. Processes real-time data for voltage/current regulation .
  • UNITROL 1020 UNS0119A-Z Function: Generator excitation controller providing precise voltage regulation (0–125V DC output) and load balancing for synchronous generators .
  • Integration: AFP9075355 interfaces with UNITROL 1020 via backplane communication, enabling unified control logic and diagnostics. Note: V100 is unrelated (dental equipment; see ).