ABB

ABB CMA121 DC Power Supply Module

Technical Specifications

• Measurement Range: Offers a wide range of measurement options tailored to specific application needs, typically from 0-400 mbar to 0-40 bar
• Accuracy: High accuracy, often within ±0.075% of span, ensuring reliable readings
• Output Signal: Provides standard output signals such as 4-20mA or digital outputs like HART, Foundation Fieldbus for easy integration with control systems
• Operating Voltage: Operates on typical industrial power supplies, commonly 12 to 36 V DC
• Power Consumption: Designed for low power consumption, optimizing energy efficiency
• Operating Temperature: Suitable for operation in a broad temperature range, usually from -40°C to +85°C
• Environmental Protection: Rated IP66 or IP67, providing protection against dust and water ingress
• Process Connections: Available with various process connections to suit different installation requirements
• Certifications: Meets international standards for safety and performance, including ATEX, IECEx, and others applicable to hazardous locations

ABB IMCAM07B0000 Intelligent Servo Drive Controller

Technical Specifications

• Interface: Supports multiple industrial protocols such as Profibus DP, CANopen, DeviceNet, and others depending on configuration
• Network Connectivity: Equipped with connectors suitable for different network types including RJ45, M12, and terminal blocks
• Data Transfer Rate: Varies by protocol, typically supports speeds up to 12 Mbps for high-speed data transmission
• Operating Voltage: Operates on standard industrial power supplies, commonly 24V DC
• Power Consumption: Designed for low power consumption, typically less than 5W
• Operating Temperature: Suitable for operation in a wide range of temperatures, usually from -25°C to +70°C
• Humidity Range: Can operate effectively in environments with humidity levels from 5% to 95%, non-condensing
• Dimensions: Compact design suitable for installation in confined spaces within control cabinets
• Certifications: Complies with international standards for safety and electromagnetic compatibility (EMC)

ABB PNI800 Plant Network Interface Module

1. Technical Specifications • Dimensions: 243.84 mm depth × 73.66 mm height × 170.18 mm width • Weight: 0.5 kg net • Power Supply: 24 V DC (18–36 V) • Operating Temperature: −25 °C to +70 °C • Environmental: RoHS compliant, G3 corrosive-gas rated • Communication Ports: Two independent Ethernet 10/100 Mbit RJ-45 ports plus two isolated RS-232/RS-485 serial ports • Protocols: Modbus RTU/TCP, Ethernet/IP, PROFINET, PN800/TriStation, IEC 61850 GOOSE, UDP, TCP/IP • Redundancy: Dual-attached node for PRP (IEC 62439) redundant LANs (PN800A & PN800B) • LED Indicators: Link, activity, fault per port

FOXBORO FCP280 Field Control Processor

1. Technical Specifications • Processor: ARM-based control processor with 128 MB SDRAM and 128 MB flash memory • I/O Capacity: Up to 128 Fieldbus Modules (FBMs) per controller – 200-series FBM: 32 per HDLC fieldbus link, 4 links total → 128 max – 100-series FBM: 64 per link or mixed configurations up to 128 total • Communication: – Fieldbus: 2 Mbps HDLC (200-series) or 268 kbps HDLC (100-series) – Control network: 100 Mbps copper or fiber Ethernet with dual-redundant adapters • Control Blocks: 8 000 configurable blocks, 16 000 blocks per second throughput • Scan Period: 50 ms minimum block processing cycle • Power: 24 VDC ±20 %, < 15 W typical • Environmental: −40 °C to +70 °C, G3 corrosive-gas rated, CE-marked for field mounting • Housing: Rugged die-cast aluminum enclosure, IP20 front, IP50 rear with cover

GE 369-HI-R-M-0-0-0-E Motor Management Relay

echnical Specifications • Control power: HI range 50–300 VDC or 60–265 VAC 50/60 Hz, 20 VA nominal • Motor protection functions: overload, short-circuit, locked-rotor, phase-loss, phase-reversal, ground-fault, under- and over-voltage, under- and over-frequency, power factor, thermal modeling • Current inputs: 1 A or 5 A secondary, true RMS 1.04 ms/sample, burden < 0.5 VA • RTD inputs: 12 channels, isolated 36 Vpk, supports 100 Ω Pt, Ni, Cu elements • Metering package: real-time current, voltage, power, energy, frequency, power factor accuracy ±0.5 % • Digital inputs: 6 opto-isolated, 24–250 VDC/AC • Output contacts: 4 Form-C relay outputs, 8 A make, 5 A carry • Analog outputs: 4 optional 0–1 mA / 0–20 mA / 4–20 mA, 0.5 % accuracy • Communication: front RS-232, rear RS-485 (3 ports), Modbus RTU; optional Modbus TCP/IP, Profibus-DP/DPV1, DeviceNet