Digital guide
You are here:
Rexroth 0608701018
Product Name: Industrial automation power/switching module, listed under Rexroth 0608701018.
Product Introduction: Used in Rexroth industrial automation, hydraulic and pneumatic control cabinets where stabilized DC distribution or protected power interfaces are required. Public supplier data for this exact number shows conflicting configurations, so verify the cabinet drawing before application.
Detailed content
Technical Specifications — Common Configuration A: Input 24 V DC; output 24 V DC; current rating 10 A; operating temperature -20°C to 60°C; short-circuit protection and overload protection.
Technical Specifications — Common Configuration B: Some supplier listings describe a hydraulic/pump or valve-related component with rated pressure up to 35 MPa, flow around 10 L/min and cast-iron construction. Treat this only as a secondary identification because it does not match the 24 V/10 A electrical listing.
Functional Features: Protected DC distribution with short-circuit and overload handling in the electrical configuration; robust industrial housing in the hydraulic configuration.
Application Scenarios: Industrial automation panels, hydraulic power units, pneumatic systems, process control cabinets, robotics and machinery power distribution.
Performance Parameters: 24 V nominal I/O or load supply in the electrical configuration; 10 A continuous rating where specified; wide ambient range for control-room and field enclosures.
Material And Structure: Electrical version uses industrial PCB and metal/plastic enclosure; hydraulic version uses cast iron where applicable. Confirm actual tag before material selection.
Working Principle: Electrical version regulates/switches 24 V DC load circuits and isolates faults through protection electronics. Hydraulic version converts/directs fluid power according to valve or pump mechanics where supplied.
Installation Requirements: Mount according to the Rexroth rack or panel standard; use correctly sized conductors for 10 A; provide short-circuit coordination; ensure ventilation. For hydraulic identification, follow pressure rating, flange/port standard and pump/motor alignment data.
Usage Notes: Do not exceed 10 A in the electrical listing. Confirm whether the spare number is an electrical module or hydraulic component by checking the nameplate, drawing and system BOM.
