Compatible With: AEG / Electrolux front-loading washing machines including models:

• L6xxx series
• L7xxx series
• L8xxx series
• L9xxx series
• Specific compatible models: AS-S985-802, AS-B864-001, AS-J378-000, AS-B564-000, and others in the 5000–9000 series range.

Function: Electric drain pump motor — forces wastewater out of the drum during drain and spin phases.

Voltage: 220–240 V AC / 50 Hz

Power Rating: 20–40 W (variable by cycle phase)

Flow Rate: Approximately 0.5–0.8 L/min (depending on hose configuration)

Maximum Pump Head: Approximately 0.8–1.0 m

Connection Type: Snap-fit hose connectors (18 mm and 28 mm internal diameter)

Housing Material: Engineering-grade PP (Polypropylene)

Impeller Material: Technopolymer

Weight: Approximately 0.35 kg

Key Specifications:

• Anti-blockage impeller design — handles small debris without jamming
• Built-in non-return valve — prevents backflow of water into drum
• Vibration-dampened mounting — reduces noise during pump operation
• Thermal overload protector — auto-shutoff if motor overheats

Installation Requirement:

• Disconnect power and water supply before replacement
• Access via front or rear panel (model-dependent)
• Replace O-ring seals with new ones during installation
• Verify hose connections are tight and leak-free before first use
• Run empty rinse cycle after installation to check for leaks

Usage Notes:

• This is an OEM spare part — use only genuine AEG/Electrolux components
• Do not operate machine with damaged pump — risk of water leakage and motor burnout
• Clean filter screen (located at pump inlet) every 3 months to prevent blockage