Digital guide
You are here:
AEG AS-H810-1208
Model Series: AS-H810 Series Hinge Platform
Product Introduction:
The AEG AS-H810-1208 is a heavy-duty door hinge assembly engineered for AEG front-loading washing machines. It provides the pivotal mounting point for the circular glass door, enabling smooth opening and closing while maintaining a hermetic seal during high-speed spin cycles.
Detailed content
Technical Specifications:
- Material: Zinc die-cast alloy with stainless steel pivot pin
- Load Capacity: Rated for door assembly weight up to 12 kg
- Opening Angle: 180° full open with soft-close dampening
- Cycle Rating: Tested for ≥ 10,000 open/close cycles
- Corrosion Resistance: Salt spray tested to ≥ 72 hours (ISO 9227)
- Finish: Electrophoretic coating with silver-tone appearance
Functional Features:
- Integrated door stop at 120° open position
- Self-aligning pivot mechanism for consistent door gap
- Noise-dampened operation with built-in rubber bushings
- Compatible with AEG Safe-Lock interlock system
Performance Parameters:
- Maximum Door Torque: 8 Nm at full open position
- Damping Force: 2.5 N at closing speed of 0.3 m/s
- Operating Temperature: -10°C to +80°C
- Humidity Tolerance: Up to 95% RH non-condensing
Material Composition:
- Hinge Body: Zamak 5 zinc alloy (Zn-Al-Cu-Mg)
- Pivot Pin: AISI 304 stainless steel
- Bushings: EPDM rubber
- Fasteners: Stainless steel M5 × 16mm bolts with nylon washers
Structural Features:
- Two-piece design: chassis-mount bracket and door-mount bracket
- Adjustable mounting slots for ±3mm lateral alignment
- Reinforced ribbing on load-bearing surfaces
- Integrated ground wire contact for EMI shielding
Working Principle:
The hinge uses a precision-machined stainless steel pin pressed into the zinc alloy bracket, allowing controlled rotational movement. EPDM bushings absorb vibration and prevent metal-to-metal contact. The door stop feature uses a mechanical cam surface to hold the door at the open position.
Key Advantages:
- Exceptional durability exceeding 10,000 cycle life
- Zero-play design prevents door wobble at high spin speeds (up to 1600 RPM)
- Corrosion-resistant finish for humid laundry environments
- Universal fitment across AS-H810 series AEG front-loaders
Applicable Industries:
- Washing machine OEM manufacturing
- Appliance aftermarket parts supply
- Professional laundry equipment servicing
Installation Requirements:
- Align hinge bracket with chassis mounting holes using template
- Torque bolts to 4.5 Nm ± 0.5 Nm
- Verify door gap is 3mm ± 0.5mm uniform around circumference
- Confirm door interlock switch activates at closed position
Usage Precautions:
- Do not exceed specified torque — over-tightening strips zinc alloy threads
- Replace hinge and bushings as a matched set if wear is detected
- Lubricate pivot pin with silicone-based grease only — never petroleum-based
