Technical Specifications:

• Model: UD1AG3-100N-1K D-2SA-N/CN
• Series: UD1000
• Input Configuration: Analog + Alarm + Communication (AG3)
• Form Factor Width: 100 mm (100)
• Point Capacity: 1,000 points (1K)
• Configuration: D-2SA-N
• Regional Version: /CN (China)
• Display: Color TFT LCD, 8.4-inch
• Number of Input Channels: Up to 32 universal inputs (configurable)
• Analog Output: 4 channels of 4–20 mA
• Alarm Output: 4 relay contacts (SPDT)
• Communication: Ethernet (100BASE-TX), RS-485 (Modbus RTU/TCP), USB
• Recording Media: USB flash drive (front-panel, 2 ports)
• Power Supply: 100–240 V AC, 50/60 Hz
• Panel Cutout: 92 × 188 mm (H × W)
• Dimensions: 96 × 192 × 150 mm (H × W × D)
• Protection Class: Front panel IP65 (NEMA 4X)

Functional Features:

• Universal input: TC, RTD, mV, V, mA, pulse, contact, communication (Modbus, HART)
• 8.4-inch color TFT with multi-window display (up to 8 simultaneous windows)
• Advanced math functions: totalizer, average, differential, rate of change
• Event sequence recording with millisecond timestamp
• Scheduled and triggered data backup to dual USB ports
• Built-in web server and FTP client for remote data transfer
• 3-level password protection

Performance Parameters:

• Scan Cycle: 0.1 seconds (all channels)
• Recording Interval: 0.05 to 60 seconds
• Internal Memory: 10 million data points
• Accuracy: ±0.1% of span (DC mA/V), ±0.15% of span (TC/RTD)
• Isolation: 500 V AC between channels
• Communication Speed: 115.2 kbps (RS-485), 100 Mbps (Ethernet)

Material Composition:

• Housing: Flame-retardant ABS resin front, galvanized steel chassis
• Bezel: Aluminum alloy, silver finish
• Terminal Block: Gold-plated nickel brass screw terminals

Structural Features:

• 100 mm wide horizontal panel-mount design
• Large 8.4-inch color TFT with resistive touchscreen
• Dual front-panel USB ports for simultaneous backup and data transfer
• DIN rail or panel screw mounting with quick-release clips

Working Principle:
The UD1000 acquires up to 1,000 data points from a combination of analog inputs, digital inputs, and communication-based inputs (Modbus, HART). The high-speed A/D converter and digital input circuits feed data to the microprocessor, which processes, displays, and stores data at the configured intervals. The 8.4-inch TFT provides a comprehensive multi-window view. Data is archived to 10 million-point internal memory and dual USB ports. Ethernet and RS-485 interfaces enable SCADA/DCS integration.

Advantages & Highlights:

• 1,000 point capacity — suitable for plant-wide data acquisition in a single unit
• 8.4-inch color TFT with multi-window display provides unmatched visibility
• Dual USB ports enable simultaneous backup and data transfer
• China version (/CN) with GB compliance, Chinese language, and local support
• Communication input support (Modbus, HART) reduces need for additional signal conditioners

Applicable Industries:

• Large-scale chemical plants
• Power generation stations
• Oil refineries
• Water treatment facilities
• Pharmaceutical batch processes
• Steel mills

Installation Requirements:

• Panel cutout: 92 × 188 mm (H × W)
• Power: 100–240 V AC, stable supply with ≤ 5% fluctuation
• Ethernet: CAT5e or higher, maximum 100 m
• RS-485: Shielded twisted pair, maximum 1,200 m
• Minimum 50 mm clearance above and below for ventilation
• Ground the chassis to plant earth (≤ 4 Ω)

Usage Precautions:

• Do not exceed 1,000 total configured points — this will cause data loss
• Configure input types correctly before connecting field signals
• Perform firmware updates only using Yokogawa-approved files
• Back up data to both USB ports before any major configuration change
• Clean the touchscreen with a soft, lint-free cloth; do not use alcohol-based cleaners