Technical Specifications:

• Nominal Pipe Size: 160 mm (6 inches)
• Flow Rate Range: 0.03 to 10 m/s (depends on configuration)
• Measurement Accuracy: ±0.5% of reading (at flow rate ≥ 0.3 m/s)
• Repeatability: ±0.15%
• Output Signals: 4–20 mA DC (HART 7 compliant), pulse output, Modbus RTU, FOUNDATION Fieldbus
• Power Supply: AC 85 V to 265 V, 50/60 Hz or DC 24 V (low-power version)
• Protection Rating: IP67 (transmitter); IP68 (cable entry)
• Ambient Temperature: -30°C to +80°C
• Process Temperature: -20°C to +180°C (depends on liner material)
• Process Pressure: Up to 4.0 MPa (depends on flange rating)

Material Composition:

• Electrode Material: SUS316L stainless steel, Hastelloy C, Titanium, Tantalum, Platinum (selectable)
• Liner Material: PFA, PTFE, rubber (selectable per P00 configuration)
• Flange Material: Carbon steel with EPDM coating or SS316L (selectable)
• Housing: Aluminum alloy with epoxy coating (IP67)

Structural Features:

• Flange-type installation (JIS 10K/16K/20K, ANSI 150/300, DIN PN10/PN16)
• Integral or remote transmitter configuration
• Empty pipe detection function built-in
• Electrode cleaning system compatible

Working Principle:
Operates on Faraday’s Law of Electromagnetic Induction. A magnetic field is generated by coils in the sensor tube. As conductive fluid flows through the magnetic field, a voltage is induced proportional to the flow velocity. The DPharp digital signal processing eliminates noise and provides a stable, accurate signal even in low-flow or noisy electrical environments.

Advantages & Highlights:

• No moving parts — zero pressure drop and no maintenance
• DPharp technology provides 100:1 turndown ratio
• Bidirectional flow measurement capability
• Empty pipe detection prevents false readings
• HART 7 and FOUNDATION Fieldbus for advanced diagnostics

Applicable Industries:

• Water and wastewater treatment
• Chemical and petrochemical processing
• Food and beverage manufacturing
• Pharmaceutical production
• Pulp and paper industry
• Mining and minerals processing

Installation Requirements:

• Install in a full-pipe section with minimum 10D upstream and 5D downstream straight pipe (D = pipe diameter)
• Ensure the sensor is always completely filled with liquid (no air pockets)
• Ground the flowmeter separately from the process pipeline grounding
• Use shielded twisted-pair cables for all signal connections

Usage Precautions:

• Minimum fluid conductivity required: 5 μS/cm (≥ 20 μS/cm recommended for optimal accuracy)
• Do not install in pipes with strong external electromagnetic interference without proper shielding
• Perform zero-point calibration with the pipe fully filled and stationary fluid
• For P00 configuration, verify liner material compatibility with process fluid at operating temperature