Technical Specifications:

• Model Code: F3YP22-0P
• Number of Channels: 8 channels
• Input Signal: 4-20 mA DC (2-wire transmitter powered)
• Input Impedance: 250 Ω (burden resistor built-in)
• Resolution: 12-bit A/D converter (4096 steps)
• Accuracy: ±0.1% of span
• Scan Cycle: 1 second (all 8 channels)
• Isolation: Channel-to-channel isolation, 500 VDC
• Power Supply: 5 VDC (supplied from CENTUM VP I/O bus, no external power)
• Power Consumption: ≤ 1.5 W
• Operating Temperature Range: 0°C to +55°C
• Storage Temperature Range: -20°C to +70°C
• Relative Humidity: 5% to 95% RH (non-condensing)
• MTBF: ≥ 80,000 hours
• Dimensions (W × H × D): 25 mm × 160 mm × 165 mm (standard F3 card size)
• Weight: Approximately 250 g
• Mounting Method: CENTUM VP I/O card cage (vertical insertion)

Functional Features:

• Accepts 2-wire loop-powered 4-20 mA transmitters (no external power needed)
• Per-channel configuration via CS3000 system configuration software
• Supports input filtering (adjustable deadband: 0 to 100% of span)
• Burnout detection: Outputs fixed value (3.6 mA or 21.6 mA) on wire break
• Live zero detection: Outputs fixed value on signal below 3.6 mA
• Compatible with CENTUM VP HIS, ENG, OPR, and SVP stations

Applicable Industries:
Oil & Gas, Petrochemical, Power Generation, Water/Wastewater, Chemical Processing, Pulp & Paper, Mining

Installation Requirements:

• Install in CENTUM VP I/O station (AIH or AOH cabinet)
• Use shielded twisted-pair cable (AWG 22 to AWG 18) for 4-20 mA signals
• Maximum cable length: 1000 m (at 24 AWG, depending on loop resistance)
• Ensure loop resistance ≤ 600 Ω (including transmitter and wiring)

Precautions:

• Do not apply voltage > 30 VDC across input terminals
• Verify transmitter is 2-wire type before connection
• Set correct input range in system configuration (e.g., 0-100°C, 0-10 bar)
• Replace card only with Yokogawa F3YP22-0P or compatible equivalent