Digital guide
You are here:
Honeywell CC-PAON01
Product Name: Honeywell CC-PAON01 High-Level Analog Output Module
Product Introduction: The CC-PAON01 is a high-level analog output module for Honeywell Experion PKS systems. It drives field actuators such as valves and dampers, and is widely used in HVAC, pharmaceutical, and process control applications.
Detailed content
Technical Specifications:
- Output Channels: 16 independent channels
- Output Signal Types: 4–20 mA (current), 0–10 V (voltage) configurable per channel
- D/A Conversion Resolution: 16-bit
- Output Load Resistance: Max 800 Ω (at 24 VDC supply)
- Output Voltage Range: 0–16 VDC (at 24 VDC supply)
- Supported Protocols: Modbus RTU/TCP, Ethernet/IP, Profinet (some models support HART®)
- Power Supply: 24 VDC (typical)
- Operating Temperature: 0 °C to 60 °C (some models support -40 °C to 85 °C)
- Protection Rating: IP54 (dustproof and splashproof)
- Installation: DIN rail or panel mounting
- Isolation: Current isolation between input/output to prevent surge interference
- Diagnostics: Relay output (triggered on threshold or fault), self-diagnostics and fault log recording
Functional Features: High channel density (16 channels per module) reducing hardware costs and cabinet space; flexible output type configuration via software; high-precision output control with 16-bit DAC; HART® protocol support (on some models) for digital communication with smart field instruments; output readback function for loop verification; open-circuit detection per channel; configurable fail-safe state (FAILOPT); hot-swap design.
Application Scenarios: Building automation for HVAC valve/damper control; pharmaceutical industry for actuator control complying with GMP; process control for driving various field actuators.
Performance Parameters: 16-bit D/A resolution ensures output precision and linearity; open-circuit detection promptly reports field wiring faults.
Material Composition: Industrial-grade module with IP54 rated enclosure providing dust and splash protection.
Structural Features: Modular design supporting DIN rail or panel mounting; hot-swappable for high system availability.
Working Principle: Receives digital commands from the controller, converts them via 16-bit D/A converter to standard current (4–20 mA) or voltage (0–10 V) outputs; provides channel-to-channel isolation; performs output readback and open-circuit detection for diagnostic feedback.
Installation Requirements: DIN rail or panel mounting; requires 24 VDC power supply; configure output signal type (4–20 mA or 0–10 V) per channel using Honeywell Control Builder engineering software, set thresholds and fail-safe states.
Usage Precautions: Check LED indicators (green=normal, red=fault, amber=unconfigured or warning); use Experion Station system diagnostic view for detailed status; verify output terminal wiring is secure and load resistance is within allowable range; some models support HART® protocol for advanced device management.
