Digital guide
You are here:
Honeywell 51309204-175
- Product Name: MC-TLPA02 24 VDC Power Adapter (Size A) for LLMux / SDI / SI
- Product Introduction: This is a CE-compliant, conformal-coated power adapter board that provides power and the IOP-to-FTA interface for up to two LLMux FTAs (each FTA = 16 channels, total 32 channels). It mounts in the FTA tray inside a cabinet or a NEMA 12 box and serves as a critical interface between Serial Device Interface (SDI) I/O Processors (IOPs) and remote FTAs in xPM cabinet installations.
Detailed content
- Technical Specifications:
- Type: 24 VDC Power Adapter Module for LLMux/SDI/SI
- Rating: 24 VDC, 110 mA
- Input Voltage Range: 85–265 VAC
- Output: 24 VDC, up to 25 A (per some supplier data)
- Form Factor: Size A, approx. 6 inches
- Mounting: FTA tray / cabinet / NEMA 12 box; rack or panel mount
- Connectors: Compression terminal connectors
- Weight: 1.5 kg
- Country of Origin: USA
- Functional Features: Delivers stable 24 VDC power to FTA modules. Uses compression terminal connectors and MU-KFTAxx / MU-KFTSxx interconnection cables. Supports internal cabinet installation (using 51304465-xxx shielded cable, 30–300 cm) and external remote cabinet installation up to 300 m.
- Application Scenarios: Powers logic modules, I/O processors, and communication interfaces in Honeywell LLMux, SDI, and SI distributed control systems. Applied in oil & gas, chemical processing, and power generation.
- Structural & Material Characteristics: Size A PCB-form factor (approx. 6 inches). CE-compliant version with conformal coating for harsh environments. Industrial-grade components.
- Working Principle: Converts incoming AC mains (85–265 VAC) to regulated 24 VDC output, distributing power to connected FTA modules via compression terminals while providing the signal interface between IOP and FTA.
- Installation Requirements: Mount in FTA tray inside a cabinet or NEMA 12 enclosure. Use compression terminals for wiring. For internal cabinet setups, use 51304465-xxx shielded cable (30–300 cm). For external/remote mounting up to 300 m, use MU-KLXxxx shielded cables with proper grounding at both ends.
- Usage Notes: Ground shielding correctly—internal cables ground only at the Power Adapter end; external MU-KLXxxx cables require grounding at both ends. Ensure the 24 VDC rating (110 mA) vs. output current capacity is matched to load. Verify all connections before energizing.
