Digital guide
You are here:
Honeywell 51153818-101
Product Name: Honeywell 51153818-101 Jumper Kit (Violet Jumpers, positions 1–10)
Product Introduction: This is a jumper kit configured for Honeywell Experion PKS / HC900 and TPS distributed control system backplanes. It is a passive hardware accessory used to establish electrical continuity between I/O modules and the controller backplane.
Detailed content
Technical Specifications:
- Jumper Quantity: 10 pieces
- Jumper Length: 6 inches (152 mm)
- Wire Gauge: 22 AWG
- Insulation Material: PVC
- Color: Violet
- Pitch: 2.54 mm standard
- Dimensions: 7 × 14 × 14.5 cm
- Weight: 0.4 kg
- Origin: USA
Functional Features: Pre-fabricated jumpers eliminate on-site custom wiring, reduce installation time, and guarantee signal continuity. The standardized 2.54 mm pitch is mechanically compatible with Honeywell backplane headers.
Application Scenarios: Experion PKS and HC900 controller backplane interconnection; TPS/TDC 3000 I/O module addressing and signal routing; process control, power generation, oil & gas, chemical, water treatment.
Installation Requirements: Power down the DCS cabinet before inserting or removing jumpers. Align the 2.54 mm connector precisely with the target header to avoid bending pins. Route wire bundles away from high-voltage lines to prevent electromagnetic coupling.
Usage Notes: Restricted to low-voltage system bus signaling. Not for AC power circuits. Verify the jumper position number (1–10 for -101) matches the backplane requirement before installation.
