Digital guide
You are here:
Atlas Copco TC52S-I
Product Series: TC Series — Diesel-Driven Portable Compressors (Intelligent Variant)
Product Introduction:
The TC52S-I is a diesel-driven portable screw air compressor featuring the Elektronikon Mark V intelligent controller. The “S” denotes Super Silent acoustic enclosure; the “I” denotes the integrated intelligent control system with remote monitoring and diagnostics capability.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 520 cfm (14.7 m³/min) |
| Working Pressure | 145 psi (10 bar) |
| Engine Model | Cat C4.4 ACERT Tier 4 Final |
| Engine Power | 158 hp (118 kW) at 2200 rpm |
| Fuel Tank Capacity | 85 gal (322 L) |
| Operating Weight | 13,700 lbs (6,214 kg) |
| Dimensions (L×W×H) | 196 × 71 × 78 in (4,980 × 1,800 × 1,980 mm) |
| Noise Level (at 7 m) | 74 dB(A) — Super Silent |
| Controller | Elektronikon Mark V with Connectivity |
Material Composition:
- Frame: High-strength steel with corrosion-resistant coating
- Air End: Cast iron GHH rotor set with ceramic-coated rotors
- Enclosure: Multi-layer acoustic composite with galvanized steel exterior
- Controller Enclosure: IP65-rated polycarbonate housing
Structural Features:
- Super Silent (S) full acoustic enclosure
- Elektronikon Mark V touchscreen controller with 7-inch color display
- Integrated telematics module (Atlas Copco Connectivity)
- Full-width service deck with gas strut-assisted hood
Working Principle:
The Cat C4.4 diesel engine drives the air end through a torsional vibration damper. Air is filtered, compressed in two stages, cooled, and separated. The Elektronikon Mark V controller continuously monitors discharge pressure, temperature, oil pressure, and engine parameters. It adjusts engine speed and air-end loading in real time. The connectivity module transmits operational data to Atlas Copco’s cloud platform for remote diagnostics, fleet management, and predictive maintenance alerts.
Key Advantages:
- Elektronikon Mark V reduces fuel consumption by up to 35% vs. on/off control
- Super Silent enclosure enables operation in residential proximity zones
- Remote monitoring via Atlas Copco Connectivity reduces unplanned downtime
- Integrated diagnostics display fault codes with recommended actions
Applicable Industries:
Urban construction, infrastructure projects, rental companies, quarrying, road maintenance
Installation Requirements:
- Level surface supporting minimum 14,000 lbs (6,350 kg)
- 3 ft (1 m) clearance on all sides for ventilation
- For telematics: ensure cellular network coverage or Wi-Fi access point within 30 m
- Electrical connection required only for controller and connectivity module (230V single-phase)
Usage Notes:
- First oil change at 250 hours; subsequent changes every 500 hours
- Air filter replacement interval: 500 hours or when pressure drop exceeds 2 psi
- Controller firmware updates available via USB or OTA (over-the-air) through Atlas Copco Connectivity
- Do not bypass safety interlocks on the Elektronikon controller
