Nominal Flow Rate: 1,100 L/min (1.1 m³/min) at 7 bar inlet pressure

Maximum Operating Pressure: 16 bar (232 psi)

Maximum Operating Temperature: +50 °C (+122 °F)

Connection Type: G 1″ (BSP thread) — designation “C” (implied)

Drain Type: Manual drain (standard for S-series)

Housing Material: AISI 316L stainless steel — designation “S” with grade “S4/S7”

Filter Element Material: Coalescing fiber media / activated carbon cartridge

Differential Pressure Indicator: Not equipped (standard)

Pressure Gauge: Not equipped (standard)

Dimensions (Approximate): Length 285 mm × Diameter 115 mm

Weight (Approximate): 5.2 kg

Function: Delivers oil-free, particle-free compressed air at 0.01 μm filtration level; designed for hygienic and critical process environments

Applicable Industries: Pharmaceutical manufacturing; food and beverage (HACCP critical points); medical device production; biotechnology; semiconductor fabrication; cleanroom air supply

Installation Requirement: Install vertically in clean or controlled environment; drain at bottom; 316L stainless steel permits direct contact with process air; no painting or coating required

Advantage: 316L stainless steel with electropolished internal surface (Ra ≤ 0.8 μm) meets FDA and EHEDG hygiene standards; fully welded construction eliminates crevices where bacteria can accumulate; compatible with CIP (Clean-In-Place) and SIP (Sterilize-In-Place) procedures

Material Composition — Housing: AISI 316L (UNS S31603) — 16–18% Chromium, 10–14% Nickel, 2–3% Molybdenum