Digital guide
You are here:
Atlas Copco PF3007-F-DN-HW
Product Series: PF3007 Series — Forklift-Optimized Portable Compressor (Generation 7)
Product Introduction: The PF3007-F-DN-HW is a variant of the Generation 7 platform specifically designed for forklift handling and frame-mounting applications. The “F” designation indicates a Forklift/Frame configuration with optimized forklift pocket geometry, reduced overall height, and reinforced frame points. The “DN” indicates diesel normal configuration. The “HW” suffix provides high-altitude rated capability. This unit is ideal for customers who transport compressors via forklift rather than towing.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 30.0 m³/min (1,059 cfm) |
| Working Pressure Range | 7 – 13 bar (101 – 188 psi) |
| Rated Pressure | 13 bar (188 psi) |
| Engine Model | Deutz TCD 2013 L04 2V |
| Engine Power | 247 kW (331 hp) at 1,800 rpm |
| Generator | None (C/F Configuration) |
| Compressor Element | Atlas Copco GA 30 airend |
| Cooling System | Air-cooled |
| Fuel Tank Capacity | 550 L (145 US gal) |
| Operating Weight | 9,500 kg (20,944 lbs) |
| Dimensions (L×W×H) | Approx. 4,800 × 2,100 × 2,200 mm (reduced height) |
| Noise Level (at 7m) | ≤ 94 dB(A) |
| Emissions Compliance | EPA Tier 4 Final / EU Stage V |
Material Composition:
- Frame: Reinforced S355 steel frame with integrated forklift channels
- Chassis: Low-profile design, powder-coated
- Airend: GA 30, identical to standard C configuration
- Canopy: Low-height galvanized steel canopy (2,200mm max height)
Structural Features:
- No towbar — designed for forklift transport only
- Oversized forklift pockets (ISO-standard 1,200mm spacing)
- Reinforced frame rails with 4 forklift entry points
- Reduced overall height (2,200mm) for container loading
- Removable side panels for tight-space installation
Working Principle: Identical to the PF3007-C-DN-HW. The Deutz TCD 2013 L04 2V engine drives the GA 30 airend. The F configuration differs only in structural layout — the power train, compression system, and performance are identical to the C variant. The reduced height and forklift-optimized frame make it suitable for warehouse storage and container transport.
Key Advantages:
- Optimized for forklift handling — no towbar required
- Reduced height (2,200mm) fits standard shipping containers
- 300kg lighter than C configuration due to removed towbar assembly
- Same 30 m³/min performance as standard PF3007-C
Applicable Industries: Warehouse-based rental, containerized operations, indoor/covered site work, maintenance depots
Installation Requirements:
- Flat surface with ≥ 10 tonnes/m² capacity
- Forklift with minimum 5-tonne capacity required for positioning
- No towing — forklift placement only
Usage Precautions:
- Use only ISO-standard forklift tines — non-standard tines will damage fork pockets
- Do not exceed 4,000mm lift height when forklifting (center of gravity limit)
- Same service intervals as PF3007-C-DN-HW
- Secure unit with chains when elevated on forklift
