Digital guide
You are here:
Atlas Copco PF3007-C-DN-HW
Product Series: PF3007 Series — Diesel-Driven Standard Compressor (Generation 7)
Product Introduction: The PF3007-C-DN-HW is a Generation 7 portable compressor with the “DN” (Diesel Normal) configuration, indicating a standard diesel power train optimized for reliable, continuous operation in demanding environments. The “C” denotes compressor-only (no generator). The “HW” suffix provides high-altitude capability. This is the workhorse configuration for rental and construction markets.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 30.0 m³/min (1,059 cfm) |
| Working Pressure Range | 7 – 13 bar (101 – 188 psi) |
| Rated Pressure | 13 bar (188 psi) |
| Engine Model | Deutz TCD 2013 L04 2V |
| Engine Power | 247 kW (331 hp) at 1,800 rpm |
| Generator | None (C Configuration) |
| Compressor Element | Atlas Copco GA 30 airend |
| Cooling System | Air-cooled |
| Fuel Tank Capacity | 600 L (159 US gal) |
| Operating Weight | 9,800 kg (21,605 lbs) |
| Dimensions (L×W×H) | Approx. 5,200 × 2,100 × 2,400 mm |
| Noise Level (at 7m) | ≤ 94 dB(A) |
| Emissions Compliance | EPA Tier 4 Final / EU Stage V |
Material Composition:
- Chassis: S355 hot-dip galvanized steel
- Engine: Deutz TCD 2013 L04 2V — cast iron block, aluminum head
- Airend: GA 30 with asymmetric 5:6 rotor profile
- Fuel System: Common rail injection, 1,800 bar max pressure
Structural Features:
- Single-axle towable chassis
- 4 hydraulic stabilizer legs
- Lockable canopy with lift-up hood for engine access
- Integrated tow bar with D40 hitch eye
Working Principle: The Deutz TCD 2013 L04 2V diesel engine drives the GA 30 rotary screw airend through a flexible coupling. Ambient air enters through the intake filter, is compressed in the intermeshing rotor set, cooled by the air-cooled aftercooler, and separated in the built-in oil/water separator. The DN configuration uses a standard-duty drivetrain rated for 8,000-hour service intervals.
Key Advantages:
- Most cost-effective 30 m³/min configuration in the PF range
- Lightest 30 m³/min unit at 9,800 kg
- Proven Generation 7 platform with extensive parts availability
- DN drivetrain rated for continuous heavy-duty operation
Applicable Industries: General construction, road building, rental companies, paint/sandblasting, well drilling
Installation Requirements:
- Level surface with ≥ 10 tonnes/m² capacity
- 2m minimum service clearance
- Optional electric start available
Usage Precautions:
- Engine oil: Atlas Copco recommended 15W-40 CI-4/CJ-4
- Air filter element change: every 250 hours
- Check belt tension (if belt-driven auxiliaries) every 100 hours
- Maximum ambient temperature: 45°C (derating above 40°C)
