• Channel Count: 2 analog outputs
• Output Type: 4–20 mA (configurable to 0–20 mA)
• Resolution: 12-bit (4096 steps)
• Output Accuracy: ±0.1% of full scale
• Load Impedance: Up to 600 Ω (at 24 V DC supply)
• Isolation: 500 V DC between channels and backplane
• Power Supply: 5 V DC from backplane bus
• Current Consumption: 380 mA from 5 V bus
• Operating Temperature: 0°C to +60°C
• Storage Temperature: -40°C to +85°C
• Humidity: 5% to 95% RH (non-condensing)
• Dimensions (HxWxD): 98 x 23 x 120 mm
• Weight: 0.12 kg
• Standards: IEC 61131-2, CE, UL, CSA, ATEX (Zone 2)

Functional Features:

• Diagnostics: Per-channel wire break detection, short-circuit detection, overrange/underrange indication
• Configuration: Set via Unity Pro software or front-panel DIP switches
• Update Rate: 2 ms per channel (simultaneous update)
• Hot Swap: Module can be replaced without CPU stop (with Quantum backplane)

Structure:

• 2 × 3-wire terminal blocks (for 4–20 mA output)
• 1 × 40-pin backplane connector
• LED status indicators per channel (green = OK, red = fault)

Applicable Industries:

• Process control (flow, pressure, temperature transmitters)
• Building automation (damper actuators, valve control)
• Power generation (turbine governor control)
• Oil & gas (remote I/O applications)

Installation Requirements:

• Insert into Quantum backplane rack (no screw mounting required)
• Connect shield wire to chassis ground at one end only
• Configure output range in software before commissioning

Usage Notes:

• Do not exceed 600 Ω total loop resistance
• Use shielded twisted-pair cable for noise-sensitive environments
• Calibrate zero and span at installation for best accuracy