AEG PC-K084-785

Digital guide

Part Number: PC-K084-785

Product Overview:
AEG PC-K084-785 is a genuine AEG replacement exhaust filter designed for the AEG Vampyr vacuum cleaner range (AS-P, AS-B, AS-V series). This filter serves as the final-stage filtration barrier, capturing fine dust and allergens before air exits the machine.

WhatApp

WeChat

Detailed content

Technical Specifications:

Parameter	Value
Part Number	PC-K084-785
Filter Type	Exhaust HEPA Filter (Motor Protection + Clean Air)
Filtration Efficiency	99.95% at ≥ 0.3 μm (HEPA 13 standard)
Dimensions (L × W × H)	130 × 85 × 15 mm
Material	Microfibre + Activated Carbon Layer
Frame Material	ABS Plastic with rubber gasket seal
Color	White / Light Grey
Compatible Series	AEG Vampyr AS-P, AS-B, AS-V
Replacement Interval	Every 6 months (or 3 months for allergy sufferers)
Origin	Genuine AEG / Electrolux OEM Part

Compatible Vacuum Models:

Vampyr Model	Compatible
AS-P933-001	✅ Yes
AS-584L-231	✅ Yes
AS-B884-002	✅ Yes
AS-B875-101	✅ Yes
AS-B885-100	✅ Yes
AS-V942-001	✅ Yes
AS-V943-001	✅ Yes

Material Composition:

Filter Media: Multi-layer microfibre — Captures particles down to 0.3 μm
Activated Carbon Layer: Absorbs odours and VOCs
Frame: Rigid ABS plastic with rubber gasket for airtight seal
Gasket: Silicone rubber — Heat-resistant, durable

Structural Features:

Rectangular shape with snap-fit mounting tabs
Rubber gasket perimeter — Ensures zero air bypass
Pleated microfibre media — Maximum surface area for filtration
Rigid frame — Prevents collapse under suction pressure

Working Principle:
Air exiting the motor passes through the PC-K084-785 filter. The microfibre layer captures 99.95% of particles ≥ 0.3 μm (dust mite faeces, pollen, bacteria). The activated carbon layer adsorbs odours and volatile organic compounds. Clean air exits the vacuum. The filter must maintain an airtight seal via the rubber gasket — any gap causes unfiltered air bypass.

Installation Requirements:

Turn off and unplug vacuum before filter replacement
Locate filter housing on rear or top of vacuum body (model-dependent)
Release housing clip, remove old filter
Insert PC-K084-785 with gasket facing inward
Snap housing clip closed — verify seal is tight
Run vacuum for 30 seconds to test seal

Usage Precautions:

Replace every 6 months — Do not wash or reuse
Vacuum the filter exterior monthly with soft brush (do not wet)
Do not use if gasket is torn or frame is cracked
Use only genuine AEG PC-K084-785 — Aftermarket filters have lower filtration efficiency
Store spare filters in dry, sealed bag

Applicable Industries / Use Cases: