Output Voltage: 12 V DC (nominal, adjustable via internal trimmer ±5%)

Output Current: 10.8 A (maximum at 12 V)

Input Voltage Range: 100–240 V AC, 50/60 Hz (universal input)

Input Current (max): 1.8 A at 100 V AC / 0.9 A at 240 V AC

Efficiency: ≥ 85% (typical at full load, 230 V input)

Power Factor: ≥ 0.95 (at 230 V, full load)

Output Ripple & Noise: ≤ 120 mV peak-to-peak

Line Regulation: ± 1%

Load Regulation: ± 2%

Protection Features:

• Over-Current Protection (OCP): Hiccup mode, auto-recovery
• Over-Voltage Protection (OVP): 115% of rated output, latch-off type
• Short-Circuit Protection (SCP): Hiccup mode, auto-recovery
• Over-Temperature Protection (OTP): 105°C ± 5°C, auto-recovery

Cooling Method: Forced air cooling (internal fan, 80 mm)

Operating Temperature Range: -20°C to +70°C

Storage Temperature Range: -40°C to +85°C

Insulation: Reinforced insulation (Class II, no earth required)

Isolation Voltage: 3000 V AC (input to output, 1 minute)

MTBF: ≥ 100,000 hours (at 25°C, full load)

Dimensions (L x W x H): 199 x 97 x 38 mm (approximate, standard 1/4 brick size)

Weight: 0.55 kg (approximate)

Connectors: Screw terminal block (input + output)

Certifications: CE, UL/cUL (UL60950-1), FCC Part 15 Class B, RoHS compliant

Material Composition:

• Enclosure: Aluminum (anodized) / Steel (painted)
• PCB: FR-4, conformally coated
• Transformer: Ferrite core, copper windings
• Capacitors: Electrolytic (105°C rated, Japanese brand)
• Fan: Ball bearing, 80x80x25 mm, DC 12 V

Applicable Industry: Industrial automation, CCTV systems, LED lighting drivers, communication equipment, medical devices, point-of-sale terminals

Installation Requirements:

• Mount in a well-ventilated enclosure with minimum 20 mm clearance on all sides
• Do not block air inlet or outlet
• Use 1.5 mm² minimum wire gauge for output connections
• Connect protective earth to chassis if used in Class I equipment
• Derate output by 1% per °C above 50°C ambient temperature

Usage Precautions:

• Do not exceed rated output current
• Do not operate in environments with excessive dust, humidity, or corrosive gases
• Allow 5-minute warm-up before full load operation
• Do not open enclosure (no user-serviceable parts inside, dangerous voltages present)