Technical Specifications:

• Rated Current (In): 1 A
• Poles: 1P (Single Pole)
• Rated Voltage (Ue): 230/400V AC
• Rated Short-Circuit Breaking Capacity (Icn): 6 kA
• Rated Ultimate Breaking Capacity (Icu): 6 kA
• Trip Curve: Curve C (trips at 5× to 10× In for short-circuit)
• Mechanical Life: 20,000 operations
• Electrical Life: 10,000 operations at rated current
• Operating Temperature Range: -25°C to +70°C
• Dimensions (W×H×D): 18 mm × 85 mm × 65 mm
• DIN Rail Mounting: 35 mm standard TH35 rail

Material Composition:

• Housing: Flame-retardant polyamide PA66 (UL94 V-0 rated)
• Contacts: Silver alloy (AgSnO₂) for arc resistance
• Arc Chute: Stainless steel de-ion plates
• Terminals: Tin-plated copper alloy, screw terminal type
• Trip Mechanism: Bimetallic thermal element + electromagnetic solenoid

Structural Features:

• Modular 1-pole width (17.5 mm)
• Visual toggle indicator: green = ON, red = OFF/TRIPPED
• Screw-clamp terminals for solid and stranded conductors up to 25 mm²
• Clip-on DIN rail attachment with snap-in/snap-out capability

Working Principle:

• Overload Protection: Bimetallic strip bends when current exceeds rated value for sustained duration, triggering mechanical release.
• Short-Circuit Protection: Electromagnetic solenoid activates instantly when current exceeds 5–10× In, forcing immediate contact separation.
• Arc Extinction: Arc chute splits and cools the arc plasma, enabling safe interruption at 6 kA.

Key Advantages:

• Curve C characteristic suitable for mixed residential loads (lighting + small appliances)
• 6 kA breaking capacity meets all European residential requirements
• Compact 1-pole design saves space in distribution boards
• VDE and CE certified for European market compliance

Applicable Industries:

• Residential building electrical installations
• Commercial office lighting circuits
• Small retail socket circuits
• Control panel final circuit protection

Installation Requirements:

• Mount on 35 mm DIN rail (EN 60715)
• Torque terminal screws to 2.5 Nm
• Maximum conductor cross-section: 25 mm² (copper) / 16 mm² (aluminum)
• Must be installed by a qualified electrician per local electrical code

Usage Precautions:

• Do not exceed rated current of 1 A — nuisance tripping will occur
• Do not use as a switch for frequent on/off cycling
• Verify tripping after installation using test button
• Replace immediately after any short-circuit fault — internal contacts may be welded