Output Signal: 4-20 mA (isolated, two-wire)

Supply Voltage: 24 V DC (±10%)

Isolation Voltage: 1500 V DC (input to output to power)

Accuracy: ±0.1% of span (at 25°C)

Temperature Drift: ±0.015% of span / °C

Response Time: ≤ 10 ms (0 to 90% step change)

Load Capacity: Maximum 600 Ω at 24 V DC supply

Protection Class: IP20 (DIN rail mount enclosure)

Operating Temperature: -20°C to +60°C

Storage Temperature: -40°C to +85°C

Mounting: 35 mm DIN rail (EN 60715)

Dimensions (W × H × D): 22.5 mm × 90 mm × 112 mm

Housing Material: Polycarbonate (UL94 V-0 flame rating)

Key Features:

• Galvanic isolation prevents ground loop interference
• Loop-powered — no separate power supply required for field devices
• Conformal coated PCB for humidity and dust resistance
• DIP switch selectable: input/output range scaling (0-10 mA, 4-20 mA, 0-20 mA)

Applicable Industries: Process control, water/wastewater treatment, oil & gas, power generation, building automation

Installation Requirements:

• Mount on DIN rail 35 mm, TS 35/7.5 or TS 35/15
• Maintain minimum 10 mm clearance above and below module for ventilation
• Use shielded twisted-pair cable for signal lines (max 500 m run)
• Ground shield at one end only (drive end)

Usage Notes:

• Do not exceed 600 Ω total loop resistance (including wire resistance)
• Verify polarity before energizing — reverse polarity causes no output
• Calibrate zero and span using front-panel potentiometers annually