Material Composition:

• Frame: Cold-rolled Steel, 2.0 mm thickness
• Finish: White Epoxy Powder Coating (RAL 9010)
• Anti-vibration Pads: EPDM Rubber, 4 mm thick
• Fasteners: Stainless Steel (AISI 304), M6 bolts with nylon lock nuts

Dimensions:

• Width: 600 mm (matches 60 cm appliance standard)
• Depth: 600 mm
• Height: 28 mm (frame thickness)

Load Capacity: Maximum 40 kg static load on top unit

Function: Mechanically connects a washing machine (bottom) to a tumble dryer (top) into a single vertical stack, saving floor space. Includes vibration-dampening pads to prevent noise transmission between units.

Working Principle: Frame bolts to the rear top of the washing machine and the rear bottom of the dryer. Anti-vibration pads decouple the two units, preventing the dryer’s vibration from transferring to the washer.

Installation Requirements:

• Both appliances must be 60 cm wide, freestanding models
• Place washing machine first, then attach frame, then place dryer on top
• Tighten all 4 × M6 bolts to 8 Nm torque
• Level both units using adjustable feet — stack must be plumb within 2 mm
• Connect water supply and drain to bottom unit only

Usage Notes:

• Never stack a washer on top of a dryer — this kit is washer-bottom, dryer-top only
• Maximum combined weight: 120 kg
• Do not operate dryer on a soft or uneven surface when stacked
• Check bolt tightness every 6 months