Digital guide
You are here:
AEG AS-BDEP-208
Product Name: AEG AS-BDEP-208 Evaporator Coil Assembly (Dehumidifier Component)
Product Category: Dehumidifier Internal Component — Evaporator
Model Series: AS-BDEP Series
Overview: The AEG AS-BDEP-208 is the evaporator coil assembly used in AEG dehumidifier units (DAU and DEA series). It is the primary heat exchange surface where moist air is cooled below dew point, causing water vapor to condense and collect in the tank.
Detailed content
Key Specifications:
| Parameter | Value |
|---|---|
| Part Number | AS-BDEP-208 |
| Component Type | Fin-and-Tube Evaporator Coil |
| Refrigerant Compatibility | R134a / R290 (propane) |
| Coil Material | Copper tubes + Aluminum fins |
| Fin Density | 12 fins per inch (FPI) |
| Tube Diameter | 7 mm (OD) |
| Coil Dimensions | 310 × 240 × 40 mm (approximate) |
| Operating Temperature (Surface) | 2°C – 8°C (during operation) |
| Pressure Rating | 3.0 MPa (test pressure) / 1.8 MPa (working pressure) |
| Weight | Approximately 1.8 kg |
| Compatible Models | AEG DAU104, DEA156, DEA180 series dehumidifiers |
Functional Features:
- High-efficiency heat transfer via copper-aluminum construction
- Hydrophilic fin coating promotes condensate drainage
- Corrosion-resistant with anti-microbial fin treatment
Material Composition:
- Tubes: T2脱氧 copper (99.9% Cu)
- Fins: 1100-series aluminum alloy
- Fin Coating: Hydrophilic blue/silver anti-corrosion layer
Installation Requirement:
- Handle with gloves — oil from skin causes corrosion.
- Connect refrigerant lines with nitrogen purge before charging.
- Ensure drain pan is level to prevent water overflow.
Usage Notes:
- Clean fins annually with soft brush and mild detergent.
- Do not bend or crush fin array — reduces airflow and efficiency.
- Replace entire assembly if refrigerant leak is detected — do not patch.
