Digital guide
You are here:
AEG AS-B827-032
Product Name: AEG AS-B827-032 True HEPA Filter Cartridge
Product Category: Air Purifier Filter — HEPA Grade
Model Series: AS Series HEPA Filters
Overview: The AEG AS-B827-032 is a True HEPA (High Efficiency Particulate Air) filter cartridge for AEG air purifiers. It captures 99.97% of particles down to 0.3μm in diameter, including bacteria, mold spores, pollen, and fine dust.
Detailed content
Key Specifications:
| Parameter | Value |
|---|---|
| Part Number | AS-B827-032 |
| Filter Type | True HEPA (H13 grade per EN 1822) |
| Filtration Efficiency (≥0.3μm) | 99.97% |
| Filtration Efficiency (≥0.1μm) | > 99.5% |
| Material | Borosilicate micro-glass fiber media (randomly arranged) |
| Frame Material | ABS plastic with silicone gasket seal |
| Dimensions | 290 × 290 × 65 mm |
| Service Life | 12 months (under normal residential use, 8 hrs/day) |
| Airflow Resistance (Initial) | < 120 Pa at 300 m³/h |
| Maximum Airflow Resistance (End of Life) | < 250 Pa |
| Operating Temperature | -10°C – 50°C |
| Operating Humidity | 20% – 80% RH |
| Certifications | EN 1822 H13, ISO 16890 ePM1 55% |
| Weight | Approximately 0.9 kg |
| Compatible Models | AEG AX7-I503D, AX8-I603D, AX9-I703D air purifiers |
Functional Features:
- Captures bacteria, viruses (aerosolized), mold spores, pollen, PM2.5, smoke particles
- Activated carbon夹层 (integrated carbon layer for VOC and odor removal)
- Electrostatic charge enhances sub-micron particle capture
- Pleated design maximizes surface area (5.2 m² effective filtration area)
Material Composition:
- Filter Media: Borosilicate micro-glass fibers (diameter 0.5–2.0 μm)
- Separator: Hot-melt polyolefin spacer net
- Frame: Injection-molded ABS with UV-stabilized finish
- Seal: Food-grade silicone gasket
Installation Requirement:
- Remove all packaging before installation — do not operate without removing plastic wrap.
- Insert into rear filter slot with handle facing upward.
- Press firmly until side latches engage.
- Reset filter life counter on control panel after installation.
Usage Notes:
- Do not vacuum the HEPA filter — damages fiber structure.
- Replace immediately if airflow drops below 50% of original rate.
- Store unused filters in original sealed bag in dry environment.
- Do not expose to direct sunlight — UV degrades fiber integrity over time.
