Key Specifications:

• Part Number: A18370
• Bearing Type: 6205-2RS deep groove ball bearing
• Inner Diameter: 25 mm
• Outer Diameter: 52 mm
• Width: 15 mm
• Seal Type: Double rubber contact seal (2RS)
• Shaft Diameter: 30 mm (axle end)
• Maximum RPM Rating: 1,600 RPM
• Load Rating (Dynamic): 14 kN
• Load Rating (Static): 7.8 kN
• Lubrication: Pre-greased with high-temperature lithium grease (NLGI Grade 2)
• Weight: 85 g per bearing
• Quantity per Kit: 2 bearings + 2 seals

Material Composition:

• Bearing Rings: Chrome steel AISI 52100 (hardness 58–62 HRC)
• Rolling Elements: Chrome steel AISI 52100
• Cage: Glass-fiber reinforced polyamide PA66-GF25
• Seals: NBR (Nitrile Butadiene Rubber) with spring-loaded garter

Functional Features:

• Pre-Lubricated: Factory-filled grease lasts 10+ years under normal conditions
• Double Sealed: Prevents water and detergent ingress into bearing
• Noise Reduction: Tight tolerance manufacturing ensures smooth, quiet rotation
• Universal Fit: Compatible with 30 mm axle diameter across multiple AEG/Electrolux models

Compatible Models (Confirmed):

• AEG L6FBG841
• AEG L7FBE68S
• AEG L7FBE68SC
• AEG L8FBE68S
• Electrolux EW6F3R84S
• Electrolux EW7F3R48S

Installation Requirements:

• Requires full drum removal from machine
• Use bearing puller tool (AEG 1108719001) for safe extraction
• Press new bearing onto shaft using hydraulic press — do not hammer
• Replace both bearings simultaneously — never replace only one
• Inspect drum spider and shaft for scoring before installation

Usage Notes:

• If drum spider shows cracks, replace entire drum assembly — do not reuse with new bearings
• Verify drum spins freely by hand after reassembly before connecting belt
• Run an empty spin cycle at 1,400 RPM after installation — listen for abnormal noise
• Do not exceed 1,600 RPM — higher speeds void bearing warranty