Motor Type: AC Shaded-Pole Motor (single-phase induction)

Rated Voltage: 220-240V AC, 50 Hz

Rated Power: 25 W (typical for condenser fan application)

Rated Speed: 2,700 RPM (±10%)

Airflow: Approximately 40-50 CFM (cubic feet per minute)

Static Pressure: 80-120 Pa

Bearing Type: Sleeve bearing (oil-impregnated bronze)

Insulation Class: Class B (130°C)

Protection Rating: IPX4 (splash-proof)

Dimensions (Approximate): 120 x 120 x 85 mm (housing)

Shaft Diameter: 4 mm

Fan Blade Material: Glass-fiber reinforced polyamide (PA66-GF30)

Function: Draws ambient air through the condenser heat exchanger to cool and condense moisture from the drum exhaust, enabling the condenser drying system to function without external venting

Location: Mounted at the rear of the dryer cabinet, directly behind or adjacent to the condenser unit

Symptoms of Failure:

• Dryer overheats and shuts down
• Excessively long drying times
• No airflow detected at rear of machine
• Burning smell from motor windings

Replacement Interval: Motor is rated for 10+ years under normal operation; failure typically results from dust accumulation or bearing wear

Installation Notes:

• Mount using original rubber vibration dampeners
• Ensure fan blade rotates freely without obstruction
• Reconnect to PCB PC-Z984-785 via correct connector