Digital guide
You are here:
AEG 6728-042.24466
Product Name: AEG 6728-042.24466 Motor Assembly (OEM Spare Part)
Product Category: Motor / Drive Motor Component
Model Series: Universal AEG Motor Assembly
Overview: This is an original equipment manufacturer (OEM) motor assembly used in AEG washing machines and tumble dryers. It functions as the primary drive motor for drum rotation.
Detailed content
Key Specifications:
| Parameter | Value |
|---|---|
| Part Number | 6728-042.24466 |
| Motor Type | Universal (Series-Wound) Motor |
| Rated Voltage | 220–240 V AC |
| Rated Frequency | 50 Hz |
| Rated Power | 250–300 W (typical for mid-range models) |
| Rotation Speed | 8,000 – 12,000 RPM (variable, controlled by PCB) |
| Insulation Class | Class B (130°C) |
| Bearing Type | Ball Bearing (sealed, maintenance-free) |
| Shaft Diameter | 12 mm (D-cut shaft) |
| Mounting Type | Rear-mounted flange with 4-bolt pattern |
| Weight | Approximately 3.2 kg |
Material Composition:
- Stator: Laminated silicon steel core with copper windings
- Rotor: Copper-wound commutator with carbon brushes
- Housing: Die-cast aluminum alloy with powder-coated finish
- Shaft: Hardened carbon steel
Compatible Models: AEG L6, L7, L8 series washing machines; ATD, ATL series tumble dryers (verify via full model number).
Installation Requirement:
- Disconnect power supply before replacement.
- Align D-cut shaft precisely with drum bearing coupling.
- Torque mounting bolts to 8–10 Nm.
- Re-calibrate drum balance after installation.
Usage Notes:
- Replace carbon brushes every 3–5 years under heavy use.
- Do not operate with damaged bearings — causes excessive vibration and noise.
- Always use original AEG motor assembly to maintain warranty compliance.
