Digital guide
You are here:
AEG 6054-042.20401
Product Name: Electronic Control Module (PCB)
Model Series: 6054 Series — Main Control Board
Applicable Products: AEG Washing Machines / Dryers (Lavamat / ÖKOMix series)
Product Description:
This is a main electronic control board used in AEG front-loading washing machines and tumble dryers. It serves as the central processing unit for the appliance, managing all cycle operations, water intake, temperature regulation, spin speed control, and error diagnostics.
Detailed content
Technical Specifications:
- Part Number: 6054-042.20401
- Board Type: Multi-layer PCB with SMD components
- Input Voltage: 220–240V AC, 50/60Hz
- Control Interface: Microprocessor-based digital control
- Connector Pins: Multi-pin harness connector (typically 20–30 pins)
- Operating Temperature Range: 0°C to +60°C
- Firmware: Pre-programmed for specific AEG machine models
Functional Features:
- Controls wash cycle selection, water level, temperature, spin speed, and drain pump activation
- Manages door lock interlock safety system
- Provides error code display via LED indicators on the control panel
- Communicates with water inlet valve, drain pump, heater (NTC/PTC), and motor (inverter/triac)
Advantages:
- High reliability with industrial-grade component selection
- Full diagnostic capability — stores fault codes for service technicians
- EMC-compliant design for electromagnetic compatibility
Installation Notes:
- Must be installed in a dry, vibration-isolated position inside the machine cabinet
- All connectors must be fully seated and locked before powering on
- Replacement requires full system reset after installation
