Digital guide
You are here:
AEG 227975V
Product Name: Drain Pump Motor
Model Series: 227975 Series — Washing Machine Drain Pump
Applicable Products: AEG / Electrolux Front-Loading Washing Machines (Lavamat, ÖKOMix, L6/L7 series)
Product Description:
The AEG 227975V is a centrifugal drain pump motor assembly used in AEG front-loading washing machines. It is responsible for pumping out dirty wash water during the drain phase and circulating water during rinse cycles. It is a universal replacement pump compatible with multiple AEG and Electrolux machine models.
Detailed content
Technical Specifications:
- Part Number: 227975V
- Motor Type: Single-phase AC induction motor (shaded pole or capacitor-run)
- Rated Voltage: 220–240V AC, 50Hz
- Rated Power: 20W – 40W
- Maximum Flow Rate: 80 – 120 L/min
- Maximum Head Pressure: 0.5 – 1.2 m (5 – 12 kPa)
- Rotation Speed: 2800 – 3200 RPM
- Outlet Diameter: 18mm – 22mm (hose barb)
- Noise Level: ≤ 72 dB(A)
- Cable Length: ~1.0 meter with 3-pin connector
Materials:
- Pump Housing: Polypropylene (PP) with glass fiber reinforcement
- Impeller: Technical polymer (PPS/PA66)
- Motor Windings: Copper wire, Class B insulation (130°C)
- Shaft Seal: Ceramic / carbon mechanical seal
- Mounting: Rubber vibration dampeners (4-point)
Functional Features:
- Self-priming capability — can restart pump operation without manual re-priming
- Filter trap integrated — captures coins, buttons, lint to prevent blockage
- Anti-vibration mounting reduces noise transmission to cabinet
Applicable Models (cross-reference):
- AEG Lavamat L66270FL, L76275TL, L86275FL
- Electrolux EW6F, EW7F series
Installation Requirements:
- Mount using original rubber grommets — do not use rigid mounting
- Ensure hose connections are airtight — use hose clamps (16–22mm range)
- Filter must be cleaned before each pump installation
