Model Series: 110CPU Series (Compressor Motor)

Part Number: 110CPU61210

Type: Hermetic Reciprocating Compressor

Compressor Type: Single-cylinder, rotating type

Refrigerant Compatibility: R-22 / R-410A / R-32 (verify variant)

Displacement: 11.5 cc/rev

Rated Voltage: 220-240V / 50Hz / 1-phase

Rated Current: 8.5 A (RLA) / 11.2 A (LRA)

Rated Input Power: 1,950 W

Operating Frequency: 50 Hz

Maximum Operating Pressure (Discharge): 4.2 MPa (42 bar)

Maximum Operating Pressure (Suction): 1.8 MPa (18 bar)

Oil Type: Polyolester (POE) Oil – AEG Original Compressor Oil

Oil Charge: 450 ml (pre-filled, non-serviceable in field)

Dimensions (W x H x D): 340 mm x 380 mm x 310 mm (approximate, mounting bracket included)

Net Weight: 22.5 kg

Structure Features:

• Hermetically sealed steel shell (welded, non-serviceable internally)
• Copper winding motor with thermal overload protector
• Vibration-dampening rubber mounting feet (4 points)
• 3/8″ and 5/8″ flare fittings (suction and discharge)
• Built-in crankcase heater (prevents refrigerant migration)

Material Composition:

• Shell: Carbon steel with epoxy coating
• Windings: Copper (Class H insulation)
• Valves: Steel reed valves
• Mounting: Rubber vibration isolators + steel bracket

Application:

• Outdoor unit compressor for AEG 3.5 kW–5.0 kW split air conditioners
• Commercial display case refrigeration
• Small cold room applications

Installation Requirements:

• Must be installed in outdoor unit with adequate ventilation (min 30 cm clearance on all sides)
• Mounted on vibration-isolating rubber pads
• Electrical connection via dedicated contactor with capacitor (45 µF / 450V)
• Refrigerant piping: suction Ø 12.7 mm, liquid Ø 6.35 mm
• Oil separator required in system if piping length exceeds 15 m

Usage Notes:

• Never operate compressor without refrigerant (causes motor burnout)
• Ensure correct oil type (POE only – do not mix with mineral oil)
• Replace thermal protector if tripped (do not bypass)
• Verify voltage within ±10% of rated value before startup