Digital guide
You are here:
Woodward 8915-1154
Product Family: 3103 Gas Valve with EM35MR Electric Actuator
Key Family Design Features (verified from Woodward official manual 26734):
-
All-electric actuator eliminates hydraulic oil supply entirely
-
Brushless servomotor with samarium-cobalt permanent magnets; stator windings completely sealed
Detailed content
-
Precision planetary gearbox with two resolver-type shaft position sensors (motor rotor position + output shaft position)
-
Slip clutch allows full-speed impact into optional external rigid mechanical stops
-
Cast aluminum explosion-proof housing with thermal potting compound for heat transfer
-
Motor output shaft directly coupled to valve input shaft via stainless steel torsional coupling
-
Inlet guide tube conditions inlet flow and directs contaminants through metering port
-
Metering sleeve support bearings positively sealed from gas
-
Self-cleaning metering structure adapts to sour gas service
Verified Family Performance:
-
Output Shaft Rotation: 60°
-
Continuous Output Torque: ±24.86 N·m (±220 lb-in)
-
Peak Output Torque: ±62.4 N·m (±552 lb-in)
-
Clutch Release Torque: ±68 N·m (±600 lb-in)
-
Torque Constant: 1.8 N·m/A
-
Slew Rate: >600°/sec at 24 Vdc motor terminal
-
Component Weight: ~44 kg (96 lb)
-
Gas Connection: 2-inch 600# ANSI B16.5 flange
Installation & Usage: Same requirements as documented for 8915-1152 — 25 µm absolute gas filtration, shielded resolver wiring, protected conduit entries, strict contaminant limits (<10 µm particles ≤30 ppm, >10 µm ≤0.3 ppm), and avoidance of over-pressure/over-temperature operation.
Note: Exact flange size, port configuration, and certification variant of 8915-1156 require confirmation from Woodward factory documentation. Current Woodward literature directs new designs to GS40/GS50 Series as upgrade replacements for the 3103/EM35 family.
