Technical Specifications​

Input range 0 to 5 A AC, output range 0 to 1 mA DC, galvanic isolation between input, output and auxiliary circuits, accuracy ±0.5% of full scale, response time up to 400 ms to 90% of final value, DIN-rail or panel-surface mounting, black thermoplastic enclosure, operating temperature 0 to 60°C.

Functional Features​

Linear current scaling, electrical isolation, analog metering compatibility, legacy switchgear replacement, stable output under reference conditions, simple screw-terminal wiring.

Application Scenarios​

Low-voltage switchboards, motor control centers, generator paralleling panels, load monitoring systems, retrofit of obsolete analog instrumentation loops and PLC AC current acquisition.

Performance Parameters​

Proportional 0 to 5 A AC input to 0 to 1 mA DC output, full-scale accuracy ±0.5%, isolation barrier for primary bus protection, repeatable calibration across the rated temperature range.

Material Composition​

High-impact industrial thermoplastic housing, copper alloy terminal inserts, internal transformer/conditioning circuit, isolation components and calibration elements.

Structural Features​

Compact transducer body, DIN or panel mounting base, molded terminal compartment, isolated input/output sections, identification label for catalog 8410-CLE-202001.

Working Principle​

The AC current from the external current transformer enters the transducer, is scaled and rectified by the internal conditioning circuit, electrically isolated from the output section, and converted into a proportional low-level DC signal for downstream measurement equipment.

Installation Requirements​

Mount on a 35 mm DIN rail or rigid panel surface, connect the CT secondary to the input terminals with correct polarity, route the DC output to the meter or PLC analog input, provide shield grounding at a single reference point, verify CT ratio before energization.