Outer Diameter: 34 mm (1.34 in)

Overall Length: 22 mm (0.87 in)

Shaft Diameter: 6 mm (0.24 in) with Keyway

Shaft Type: Clamped Shaft (C = Clamped)

Resolution: 22-Bit (4,194,304 Counts/Rev) Single-Turn / 12-Bit Multi-Turn (4,096 Revolutions)

Total Counts: 22-Bit + 12-Bit = 17,179,869,184 Counts (17.2 Billion Counts per Revolution Range)

Accuracy: ±10 arc-seconds (0.0028°)

Repeatability: ±3 arc-seconds (0.0008°)

Update Rate: 10 kHz

Output Signal: SINCOS Resolver (Analog) + Digital SSI/BiSS-C (Hybrid Output)

Supply Voltage: 5 VDC ± 5% (Digital Section), 10 VAC 1 kHz (Resolver Excitation)

Operating Speed Range: 0 to 10,000 RPM

Operating Temperature: -40°C to +105°C

Vibration Rating: 30 g (10 Hz to 2,000 Hz)

Shock Rating: 100 g, 11 ms

Protection Rating: IP67 (Dust-tight, Immersion up to 1 m for 30 minutes)

Housing Material: Stainless Steel 17-4PH

Shaft Material: Stainless Steel 17-4PH

Bearing Type: Hybrid Ceramic Ball Bearings (Si₃N₄ Balls), Pre-lubricated

Weight: 0.08 kg (0.18 lb)

Electrical Connector: M8 8-Pin Connector

Compliance Standards: CE, RoHS, REACH, MIL-STD-810G

Applicable Industries: Aerospace, Defense, Satellite Systems, Radar Antenna Positioning, Naval Gun Turrets, High-Precision Robotics, Scientific Instrumentation, Oil & Gas Downhole Tools

Key Features:

• 22-bit single-turn resolution with 12-bit multi-turn for 17.2 billion total counts — highest resolution in Kollmorgen encoder portfolio
• Glass code disk (G = Glass) provides superior thermal stability and long-term accuracy
• SINCOS resolver output provides inherent noise immunity for harsh EMI environments
• IP67 rating enables submersion and extreme contamination resistance
• Hybrid ceramic bearings eliminate lubrication maintenance and extend service life in extreme temperatures

Installation Requirements:

• Mount using clamping hub, maximum bore runout: 0.01 mm
• Resolver cable: shielded twisted pair, maximum length 50 m (analog), 10 m (digital)
• Excitation frequency must be 1 kHz ± 1% for rated accuracy
• Shaft coupling: flexible coupling mandatory to absorb axial and radial misalignment
• Do not exceed 10,000 RPM to maintain encoder accuracy rating