Digital guide
You are here:
Kollmorgen TTB2-29360-121-0-BA
Product Name: Kollmorgen TT-29360 Series Rotary Reaction Torque Transducer
Product Description: A non-contact, strain-gauge-based rotary torque transducer designed to measure reaction torque of servo/BLDC motors during dynamometer testing. Provides high-accuracy analog or digital torque signal proportional to applied load.
Detailed content
Performance Parameters:
-
Frame Size: 29360 (approx. 60 mm flange)
-
Nominal Torque Range: Typically 5–50 Nm (model-dependent; 121 variant = specific calibration range)
-
Accuracy: ±0.1 % FS (full scale)
-
Non-linearity: < 0.05 % FS
-
Hysteresis: < 0.05 % FS
-
Overload Capacity: 150 % FS (safe), 300 % FS (ultimate)
-
Signal Output: ±10 V DC analog proportional to torque (or optional digital encoder-compatible output)
-
Supply Voltage: +15 V DC / +24 V DC (depending on option)
-
Speed Rating: Up to 8,000 rpm (bearing-supported hollow shaft)
-
Operating Temperature: 0 °C to +70 °CMaterial & Construction:
-
Shaft: High-strength alloy steel, dynamically balanced
-
Housing: Aluminum with nickel plating
-
Sealing: IP54 (shaft seals); IP65 with optional seal kit
-
Bearings: ABEC-7 precision angular contactMounting Requirements:
-
Bolted between stationary TTB base and motor coupling adapter
-
Requires proper shaft alignment (< 0.05 mm TIR)
-
Ground shielding recommended for signal cablesApplication: Motor characterization labs, servo tuning verification, torque constant measurement, production test stands.
