Digital guide
You are here:
Kollmorgen TTB1-4503-3044-A
Product Name: Kollmorgen TTB Series — Rotary Torque Transducer
Product Series: TTB1 Series
Model Code: TTB1-4503-3044-A
Product Overview:
The TTB1-4503-3044-A is a high-precision rotary torque sensor from the Kollmorgen TTB1 product line, configured for integration into servo-driven motion systems requiring accurate torque feedback.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Rated Torque | 45 Nm |
| Output Signal | 4–20 mA (current loop) |
| Supply Voltage | 24 VDC |
| Linearity | ≤ ±0.1% FS |
| Hysteresis | ≤ ±0.1% FS |
| Repeatability | ≤ ±0.05% FS |
| Zero Balance | ≤ ±1% FS |
| Operating Temperature | -20°C to +80°C |
| Max Rotational Speed | 6000 RPM |
| Shaft Configuration | Solid shaft, keyed |
| Housing Material | Anodized aluminum |
| Protection Rating | IP65 |
| Connector Type | M12 8-pin |
| Weight | ~1.8 kg |
Functional Features:
- 4–20 mA output for noise-immune transmission over long cable runs
- Built-in signal conditioning electronics
- Full bridge strain gauge measurement technology
- Bidirectional torque sensing
- Temperature-compensated output across full operating range
Structural Characteristics:
- Dual-flange mounting interface
- Precision-ground solid shaft
- Hermetically sealed strain gauge chamber
- Compact form factor for OEM integration
Working Principle:
Mechanical torque induces strain on an elastic sensing element. Four strain gauges arranged in a full Wheatstone bridge configuration detect the strain. The resulting millivolt signal is conditioned, temperature-compensated, and converted to a 4–20 mA current output proportional to applied torque.
Key Advantages:
- Current loop output eliminates signal degradation over distance
- High noise immunity suitable for electrically noisy industrial environments
- Direct compatibility with Kollmorgen AKD-series servo drives
- No external signal conditioner required
Applicable Industries:
- CNC machine spindle monitoring
- Printing press torque control
- Conveyor drive systems
- Textile machinery
- Material testing equipment
Installation Requirements:
- Align coupling faces within 0.05 mm TIR
- Use torque-limiting coupling to protect sensor
- Ground shield at drive end only to prevent ground loops
Usage Precautions:
- Do not apply shock loads exceeding 3× rated torque
- Verify zero offset before each operational cycle
- Keep connector dry; replace cable gland if damaged
