Digital guide
You are here:
Kollmorgen TPA/2-15840-602
Product Name: Motor Power and Feedback Cable Assembly (TPA Series)
Product Introduction: Kollmorgen TPA cables are pre-assembled, shielded hybrid cables designed to connect servo drives (e.g., AKD, S400) to AKM-series motors. They combine power phases and feedback signals (encoder/resolver) in a single jacket for reduced wiring complexity.
Detailed content
Specific Breakdown:
-
TPA/2: Likely denotes TPA series, 2-conductor or dual-shielded variant / specific connector type (often Intercontec or M23/M12).
-
15840: Internal Kollmorgen length or configuration code (possibly 15m or specific routing).
-
602: Revision or connector orientation/pinout variant.
Technical Specifications:
-
Voltage Rating: Typically 600 V AC/DC (power cores)
-
Shielding: Overall braid + foil shield for EMI protection.
-
Conductors: Copper, stranded, with separator for feedback pairs.
-
Jacket Material: PVC or PUR (polyurethane) for flex or static applications.
-
Connectors: Molded, keyed, rotatable (Locktec or Speedtec systems), IP65/IP67 rated when mated.
-
Temperature Range: -25°C to +80°C (depending on jacket).
Features:
-
Single Cable Solution: Reduces panel space and wiring errors.
-
Printed Labeling: Direct-on-cable identification replacing stickers.
-
Compatibility: Matched impedance for encoder signals to minimize jitter.
Applications: Interconnect for AKM motors to AKD/S400 drives in all industrial environments.
Installation Requirements: Minimum bend radius must be observed (typically 10x cable diameter). Avoid running parallel to high-power non-shielded lines. Ensure connectors are fully seated and locking rings engaged.
Operating Considerations: Inspect for jacket damage in flexing applications. Use strain relief clamps. Do not modify connectors; use factory-assembled lengths.
