Frame Size: 80 mm (Flange: 80 mm × 80 mm)

Rated Continuous Torque: 2.4 Nm (21.24 lb-in)

Peak Torque: 7.2 Nm (63.73 lb-in)

Rated Speed: 3,000 RPM

Maximum Speed: 4,500 RPM

Rated Voltage: 480 VAC (Three-Phase)

Continuous Current: 6.5 A RMS

Peak Current: 19.5 A

Power Rating (Continuous): 1.0 kW (1.34 HP)

Power Rating (Peak): 3.0 kW (4.02 HP)

Encoder Type: Multi-Turn Absolute Encoder, 20-Bit Resolution (1,048,576 Counts/Rev), Single-Turn: 17-Bit (131,072 Counts/Rev)

Encoder Interface: BiSS-C Protocol

Holding Brake: None (NA = No Brake)

Cooling Method: Natural Convection (NA = Natural Air)

Shaft Type: Smooth Shaft, No Keyway (PA = Polished Shaft, No Key)

Shaft Diameter: 19 mm

Protection Rating: IP65 (Dust-tight and protected against water jets)

Housing Material: Cast Aluminum Alloy (ADC12), Black Anodized

Magnets: Neodymium Iron Boron (NdFeB), Grade N38SH

Winding Insulation Class: Class F (155°C)

Bearing Type: Deep Groove Ball Bearings, Double Sealed, Lubricated for Life (6205-ZZ Equivalent)

Electrical Connector: M23 17-Pin Connector (Power + Encoder)

Weight: Approximately 2.4 kg (5.29 lb)

Ambient Operating Temperature: 0°C to +40°C (Continuous), -20°C to +60°C (Short-Term)

Storage Temperature: -40°C to +85°C

Compliance Standards: CE, UL, RoHS, REACH, WEEE

Applicable Industries: CNC Machines, Robotics, Packaging, Printing, Material Handling, Textile, Food & Beverage, Pharmaceutical

Key Features:

• 20-bit multi-turn absolute encoder provides 1,048,576 counts per revolution for ultra-precise positioning
• Smooth shaft with no keyway eliminates backlash for high-precision applications
• IP65 rating for washdown and harsh environment operation
• Cast aluminum housing provides high rigidity and thermal mass
• BiSS-C protocol for high-speed absolute position feedback

Installation Requirements:

• Mount using 80 mm flange with 4 mounting holes (M5 tapped, 55 mm BCD)
• Alignment tolerance: ±0.05 mm radial, ±0.05 mm axial
• Coupling: Zero-backlash bellows or clamping coupling required for smooth shaft
• Cable bend radius minimum: 5× cable diameter