Cable Type: 3-phase power cable + ground + encoder cable (integrated or separate depending on configuration)

Conductor Material: Oxygen-free high-conductivity copper (OFHC), Class 5 per IEC 60228

Conductor Cross Section: Sized to match motor rated current (typically 4–6 mm² per phase for 56-frame motors)

Insulation Material: XLPE (Cross-linked Polyethylene), rated 600 V

Shielding: Overall tinned copper braid shield, coverage > 85%

Outer Jacket: PUR (Polyurethane), oil-resistant, abrasion-resistant, rated for continuous flexing

Voltage Rating: 600 VAC

Current Rating: Matched to motor rating (typically 10–15 A continuous per phase)

Temperature Range: -20 °C to +80 °C (flexing), -40 °C to +105 °C (fixed)

Bend Radius (Minimum): 5× cable outer diameter (dynamic), 3× cable outer diameter (static)

Connector — Motor Side: M23 or MS connector per Kollmorgen standard (matching 6SM terminal box)

Connector — Drive Side: Matching connector for AKD/AKD-P drive power output

Cable Length: As specified in NANANA field (custom length per order)

Key Features:

• Pre-terminated at both ends — plug-and-play installation
• Shielded for EMI compliance
• High flex life rated (> 5 million cycles for drag chain applications)
• UL and CE certified

Applicable Industries: CNC machines, robots, automated production lines

Installation Requirements:

• Route cable with minimum bend radius maintained at all points
• Secure cable with clamps at intervals not exceeding 0.5 m
• Ensure shield grounding at drive end only (single-point grounding)