Input Voltage:​ 240-480 VAC (380/400/415/440V compatible), 3-phase

Continuous Current:​ 14 Arms

Peak Current:​ Typically 28-42 Arms (depending on duration)

Control Modes:​ Position, Speed, Torque

Feedback:​ Resolver, Encoder (15-pin), ROD/SSI (9-pin)

I/O:​ 4 x Digital Inputs (24V), 2 x Digital Outputs, 2 x Analog +/-10V

Functional Features:​ Intelligent positioning profiles, jolt limiting, register control; PROFIBUS DP slave communication; auto-tuning capabilities; dual-port RAM for high-speed data exchange.

Application Scenarios:​ Large printing presses, material handling cranes, extrusion lines using PROFIBUS networks.

Material Composition:​ Rigid metal housing, high-current busbars, insulated gate bipolar transistors (IGBTs).

Structural Features:​ IP20 rated; detachable screw terminals; multiple D-sub connectors (X1 Encoder, X2 Resolver, X5 ROD/SSI, X6 PC/CAN); front option card slot occupied by PB card.

Working Principle:​ Digitally controls motor commutation via field-oriented control (FOC); receives cyclic data from PROFIBUS master for setpoint updates; manages internal current/torque limits.

Installation Requirements:​ Requires 24VDC control supply; PROFIBUS connector must have termination resistors set correctly at network ends; adequate fusing on AC input (typically 3x rated current).

Usage Precautions:​ The PROFIBUS address is set via DIP switches on the card or software; ensure baud rate matches the network; the drive must be configured for the correct motor data (inductance/resistance) to avoid instability.