Digital guide
You are here:
Kollmorgen S61400-PB
-
Product Name: ServoStar S614 Digital Servo Drive with PROFIBUS
-
Product Introduction: A single-axis servo amplifier from the S600 series (model S614 indicating 14A continuous rating), equipped with factory-installed PROFIBUS DP communication for networked motion control.
Detailed content
-
Technical Specifications:
-
Rated Output Current: 14 A RMS (continuous), approx. 12-14A peak context depending on load
-
Input Voltage: 3-phase 240–480 VAC (380/400/415/440Vac)
-
Communication: PROFIBUS DP (PB suffix)
-
Control Modes: Position, Speed, Torque (3-loop control)
-
Feedback Support: Incremental Encoder, Resolver, Hiperface
-
Current Loop Bandwidth: ~2 kHz
-
Protection Rating: IP20
-
Dimensions: Approx. 150×200×85mm (W×H×D)
-
-
Functional Features: Automatic motor parameter tuning, dynamic braking (internal), online parameter modification, fault diagnostics with coded alerts, compatible with AKM series and third-party motors.
-
Structural Characteristics: Panel mount chassis with detachable screw terminals, multiple D-sub ports (X1 Encoder, X2 Resolver, X5 ROD/SSI, X6 CAN/PC), PROFIBUS DB9 connector.
-
Working Principle: Generates PWM waveforms via digital controller regulating 3-phase output; PROFIBUS interface enables cyclic data exchange with PLC master for setpoint and status reporting.
-
Application Scenarios: Packaging machinery, printing equipment, automated assembly lines, textile machines, general-purpose medium-power multi-axis systems.
-
Installation Requirements: Secure panel mounting inside cabinet; 3-phase supply fusing; PROFIBUS cable shielded and terminated; vertical orientation for convection cooling.
-
Usage Precautions: Continuous current of 14A requires adequate cabinet cooling; verify PROFIBUS node address configuration; manage regenerative energy in high-decel applications with optional brake resistor; IP20 mandates enclosed installation.
