Digital guide
You are here:
Kollmorgen S60600-PBUS
-
Product Name: SERVOSTAR 606 (S600 Series) 6A Servo Drive with PROFIBUS-DP
-
Product Introduction: S60600 is the 6A continuous S600 drive; “-PBUS” explicitly indicates PROFIBUS-DP fieldbus interface card installed. It is a robust, proven drive for legacy PROFIBUS-based systems.
Detailed content
-
Technical Specifications:
-
Input Voltage: 3-phase 230–480 VAC (±10%)
-
Continuous Current: 6 A RMS
-
Peak Current: 12 A RMS (5 sec)
-
Rated Power: ~4 kVA
-
Control Modes: Torque, Speed, Position (with electronic gearing/cam)
-
Feedback: Incremental/absolute encoder, resolver, EnDat, Hiperface
-
Bus: PROFIBUS-DP (via expansion slot)
-
Digital I/O: 8 in / 4 out (24VDC)
-
Analog I/O: 2 in / 2 out (±10V)
-
-
Functional Features:
-
Forced-air cooling (internal fan)
-
Full protection suite (over-current, over-voltage, over-temp, motor thermal, feedback loss)
-
Parameterizable via RS232 or PROFIBUS
-
Compatible with AKM, Goldline XT, linear motors
-
-
Application Scenarios: Metal processing, legacy automotive lines, large converting machines using PROFIBUS architecture.
-
Performance Parameters:
-
Velocity Loop Bandwidth: up to 400 Hz
-
Current Loop: ~2–5 kHz
-
Operating Temp: 0–45°C (derating to 55°C)
-
-
Material & Structure: ~55 mm W × 300 mm H × 230 mm D, metal casing with fan grille, IP20, approx. 3.2 kg.
-
Working Principle: DSP-controlled vector drive; PROFIBUS telegram sets target values; internal loops regulate current/voltage/speed.
-
Installation Requirements: Vertical mounting only for fan efficiency; PROFIBUS connector with proper shielding and terminator; separate power/signal conduits.
-
Usage Precautions: Clean fan filter periodically; verify PROFIBUS station address (DIP switches); save parameter file before firmware changes; ensure regen management on 480V supply.
