Digital guide
You are here:
Kollmorgen S20360-DLS
Product Name: S200 Series Digital Servo Drive with Digital Link Option
Product Introduction: The S20360-DLS is a legacy S200 MMC Smart Drive combining an S20360-VTS base unit with an S200 Digital Link option card. It is a compact PWM servo amplifier for single-axis rotary or linear motor control in industrial automation retrofits.
Detailed content
Technical Specifications:
-
Input Voltage: 120/240 VAC single or three phase
-
Continuous Output Current: 6 A RMS
-
Peak Output Current: 18 A RMS
-
Logic / Control Supply: 24 VDC
-
Current Loop Bandwidth: up to 5 kHz
-
Velocity Loop Bandwidth: up to 800 Hz
-
Feedback Support: Hall sensors, SFD, incremental encoder
-
I/O: 4 optically isolated 24 VDC inputs, sink/source, 1 ms responseFunctional Features: Optically isolated I/O, single motor power plus feedback cable, separated “keep-alive” power input for fast e-stop recovery, DSP-based commutation, onboard diagnostics LEDs, switch-selectable torque mode.Application Scenarios: CNC axis drives, packaging machines, semiconductor handlers, woodworking equipment, medical automation.Installation Requirements: Vertical mounting on panel or DIN rail, 50 mm clearance above/below for convection, shielded motor cable, 24 VDC control supply, PE ground to cabinet busbar.Usage Notes: Discontinued model; observe derating above 30 °C, wait 5 minutes after power-off before touching terminals, use only with compatible S200 firmware.
