Digital guide

You are here:
  1. Home
  2. Kollmorgen
  3. Kollmorgen S200S22460-SRS

Kollmorgen S200S22460-SRS

  • Product Name:​ S200 High-Performance Compact Brushless Servo Drive, 24 A continuous / 48 A peak, SynqNet base unit
  • Product Introduction:​ Member of the S200® series (successor to SERVOSTAR 300/600). “S22460” = 24 A RMS continuous, 48 A peak, 460 VAC class; “-SRS” = SynqNet interface, resolver/SFD feedback capable, standard firmware.
WhatApp
WeChat

Detailed content

  • Technical Specifications:
    • AC Input:​ 3× 230–480 VAC (typical 400 VAC nominal)
    • Continuous Current:​ 24 A RMS
    • Peak Current:​ 48 A RMS (~5 s)
    • PWM Frequency:​ Configurable, typically 8–16 kHz
    • Feedback:​ Incremental encoder, resolver, SFD, optional EnDat via card
    • Command Interface:​ SynqNet (RJ45 J11/J12) or analog ±10 V on base unit
    • I/O:​ J2 motor power, J3 feedback, J4 command I/O, J5 serial, J13 discrete I/O
    • Control Loops:​ Cascaded PI current/velocity/position
    • Protection:​ Short-circuit, ground-fault, over-temp, DC-overvolt
    • Mounting:​ Panel mount in cabinet, IP00 open type
    • Cooling:​ Natural convection up to 8 A; forced air above that (this 24 A unit requires external airflow)
  • Functional Features:
    • Compact Eurocard-style power stage
    • S200 Tools GUI for tuning and node configuration
    • Supports brushless PMSM and asynchronous motors with proper feedback
    • SynqNet deterministic motion networking
  • Application Scenarios:​ Multi-axis SynqNet machines, legacy retrofit of SERVOSTAR systems, woodworking, textile, converting lines
  • Installation Requirements:​ 4-point screw fix to metal panel; 24 V logic supply; DC bus pre-charge; separate ferrite on motor leads if EMC issue; forced ventilation duct if ambient > 45 °C.
  • Usage Notes:​ Not directly firmware-compatible with AKD; motor parameters must be manually entered; SFD requires matching motor memory chip.

You may also like