Digital guide
You are here:
Kollmorgen PRD-KD40EAIZ-62
Product Name: SERVOSTAR S600 / S700 Class Digital Servo Drive Module (KD40 frame)
Product Introduction:
Refurbished/used Kollmorgen drive from the S600-era SERVOSTAR family, KD40 mechanical platform. Configured for high-speed SERCOS or fieldbus control depending on option card. Suitable for replacing legacy S600 axes in retrofit projects.
Detailed content
Technical Specifications:
-
Rated installed load: 2 kVA (S1)
-
Continuous output current: 3 Arms
-
Peak output current: 6 Arms for up to 5 s
-
Main input voltage: 230–480 V AC three-phase
-
DC bus link: 290–675 V DC
-
Auxiliary supply: 24 V DC (+15%/-0%)
-
Output stage clock frequency: 8 kHz, selectable to 16 kHz at 400 V DC bus
-
Overvoltage protection threshold: adjustable 450–900 V
-
Dissipation at rated current: approx. 40 W
-
Dimensions: 275 mm H × 70 mm W × 265 mm D
-
Weight: approx. 5 kg
-
Protection: IP20
Functional Characteristics:
Vector current control, position/speed/torque modes, SERCOS interface expansion, integrated brake control output, optical isolation on I/O, auto-tuning support via Drive GUI, regenerative resistor support.
Application Scenarios:
Legacy CNC retrofits, press automation, converting lines, robotic cells where S600 architecture is already installed.
Installation Requirements:
Vertical DIN-rail or panel mount inside IP54+ cabinet, leave 50 mm top/bottom clearance for convection, bond PE properly, use 24 V control supply independent from power stage, fit line filter if not integrated.
Usage Notes:
Verify firmware revision matches existing machine network, used units must be functionally tested for DC bus leakage and IGBT health, do not mix old S600 with AKD on same SERCOS ring without gateway.
