Connector Type: SDN (Kollmorgen Servo Drive N-series connector)

Conductor Configuration: 3 power conductors + ground

Cable Length: Standard length per order (typically 3m to 15m)

Voltage Rating: 600 VAC / 1000 VDC

Current Rating: Matched to AKD-P024/P012 series (up to 7A continuous)

Shielding: Double-shielded (braid + foil) for EMI protection

Jacket Material: PUR (Polyurethane) — oil and abrasion resistant

Bend Radius: Minimum 5x cable diameter (dynamic), 10x cable diameter (static)

Operating Temperature Range: -20°C to +80°C (moving), -40°C to +105°C (static)

Compliance: UL, CE, RoHS

Structure:

• Inner conductors: Stranded copper, class 5 per IEC 60228
• Insulation: XLPE or equivalent
• Shield: Tinned copper braid (>85% coverage) + aluminum foil
• Outer jacket: PUR, black

Applicable Industries: All Kollmorgen AKD/AKM servo systems requiring motor power connection.

Installation Requirements:

• Route cable in cable carrier or conduit for moving applications
• Maintain minimum bend radius at all times
• Use strain relief at both connector ends
• Keep away from high-voltage power cables (minimum 100 mm separation)

Precautions:

• Do not exceed rated current
• Do not crush or kink cable during installation
• Replace immediately if jacket is damaged