Digital guide
You are here:
Kollmorgen MMC-DSA2
-
Product Name: MMC-DSA2 — Distributed Servo Amplifier / Motion Interface Module (part of Kollmorgen MMC-2 / DSA distributed architecture)
-
Product Introduction: The MMC-DSA2 is a distributed servo axis interface module used in Kollmorgen’s MMC-2 (Modular Motion Controller) or standalone DSA networked motion systems. It provides axis control, I/O expansion, and communication between the host controller and BDS5 or SERVOSTAR amplifiers via fiber-optic or serial link.
Detailed content
-
Function & Features:
-
Interfaces 1–2 servo axes to central motion controller
-
Supports position/velocity/torque command modes
-
Provides local digital I/O (limit switches, home sensors)
-
Communicates over Kollmorgen proprietary serial / optical link
-
LED status indicators for communication, fault, enable
-
-
Typical Application: Coordinated multi-axis machines (printing presses, web handling, converting lines) using legacy Kollmorgen MMC-2 architecture.
-
Installation & Notes:
-
Firmware version must match MMC-2 main CPU.
-
Terminate network properly with end-of-line resistor if applicable.
-
This is obsolete/discontinued — replacement options include PCMCIA/PCI based AKD + KAS or PCM modules.
-
