Digital guide
You are here:
Kollmorgen M00607-MCEPDMM
Product Name: Kollmorgen Pre-assembled Servo Motor Cable (Power + Feedback combo or Power-only) for AKM Series
Part Pattern M00607-MCEPDMM: “M” prefix = cable/motor cable assembly; 00607 ≈ 6 m length (typical interpretation in Kollmorgen cable numbering); MC = Motor Cable; EPDM = EPDM outer jacket (oil-resistant, flexible); M = Metric connectors (M23 SpeedTec); last M = variation/revision.
Detailed content
Description & Features:
-
Shielded copper conductor cable for connecting AKD/S700/S600 drive to AKM servo motor.
-
Integrates motor power (U/V/W/PE) and may include feedback (resolver/encoder) pair in same jacket OR separate — verify from physical label.
-
Connector Drive End: Typically unterminated or with terminal lugs / drive-side connector per order; Motor End: Angled M23 SpeedTec™ plug (male/female per power vs. feedback).
-
Length: Interpreted as ~6.0 m (verify on label).
-
Jacket Material: EPDM (ethylene propylene diene monomer) — oil-resistant, flexible, suitable for drag-chain use in some variants; halogen-free.
-
Shielding: Braided copper shield, drain wire connected to motor-end connector shell and drive-side ground.
-
Temperature Rating: Typically –25 to +80 °C (flexing), –40 to +90 °C (static)
-
Bend Radius (flexing): ≥ 10 × cable OD (typical for servo cables)
-
Compliance: UL recognized, CSA, CE (low-emission shielded)
Installation & Notes:
-
Route power and feedback cables separately from high-voltage AC mains or VFD cables (> 200 mm separation or use grounded metal partition).
-
Ensure shield is grounded at ONE end (typically drive end) or both ends per Kollmorgen recommendation for noise immunity — follow latest cable installation guide.
-
Do not exceed bend radius; avoid twisting connectors during installation.
-
Verify pinout matches motor feedback type (resolver vs. encoder) before applying power.
