Digital guide
You are here:
Kollmorgen M-605-B-A9-260
Product Name: Goldline M-Series Medium Inertia Servo Motor
Product Introduction: The M-605 is part of the Goldline M-Series, which features medium inertia rotors (approximately 7 times higher inertia than B-Series) to better match compliant loads or large inertia mismatches. Rated for 230 VAC operation.
Detailed content
Technical Specifications:
-
Frame Size: 60 (approx 92x92mm or larger flange based on series scaling)
-
Rated Voltage: 230 VAC
-
Rated Speed: Approximately 3150 RPM
-
Stall Torque: High torque density typical of size 60 frame (specific value depends on stack length ‘5’)
-
Max Bus Voltage: 320 VDC
-
Insulation Class: Class H
-
Protection: IP65 with sealsFunctional Features: Optimized for systems with belt drives or gearboxes; built-in thermostat; resolver or encoder feedback; optional 24VDC or 90VDC fail-safe brake.Application Scenarios: Conveyor systems, film winding/unwinding, printing presses, and machine tool axes where load inertia fluctuates.Material Composition: Rare earth magnets, Class H magnet wire, anodized aluminum housing, stainless steel shaft.Structural Features: Metric flange mounting; rear shaft standard; liquid-tight or bayonet connectors; robust bearing system for radial loads.Working Principle: Same as B-series synchronous PM motor but with increased rotor inertia to dampen system resonances and stabilize velocity loops in compliant load applications.Installation Requirements: Align coupling precisely to prevent side loads on bearings; torque mounting bolts to specification; ensure brake wiring is isolated if present.Usage Precautions: Avoid prolonged operation in stall condition beyond thermal time constant; verify feedback cable shielding integrity to prevent noise-induced errors.
