Digital guide
You are here:
Kollmorgen KC1-M00606-NBC
Product Name: Kollmorgen KC1-M00606-NBC — KinetiComm Communications Module
Product Overview:
The KC1-M00606-NBC is a KinetiComm communication module from Kollmorgen, designed to provide real-time EtherCAT connectivity between Kollmorgen servo drives and PLCs or motion controllers.
Detailed content
Model Series: KinetiComm KC1 Series
Key Specifications:
| Parameter | Value |
|---|---|
| Protocol | EtherCAT (Slave) |
| Supported Drives | AKD, S-Series, AKM Series |
| Cycle Time | 125 µs to 1 ms (configurable) |
| Number of Axes | Up to 64 axes per module |
| Ethernet Port | RJ45, 100 Mbps, auto-negotiate |
| Power Supply | 24 VDC, 500 mA max |
| Dimensions (W×H×D) | 95 mm × 65 mm × 25 mm |
| Weight | Approximately 0.12 kg |
| Operating Temp | 0°C to +55°C |
| MTBF | >100,000 hours |
Construction & Materials:
- Enclosure: ABS plastic, UL94 V-0 flame rating
- PCB: 4-layer, conformal coated
- Connectors: M12 8-pin for EtherCAT, M8 4-pin for power
- Status LEDs: Power, Link, Data, Error
Working Principle:
The KC1 module acts as an EtherCAT slave coupler. It receives motion commands from the master (PLC) via EtherCAT frames, forwards them to the servo drive(s), and returns status/feedback data in the same cycle. It enables distributed I/O and reduces wiring complexity.
Advantages:
- Reduces wiring by up to 70% compared to point-to-point connections
- Hot-swap capable — add/remove axes without system downtime
- Daisy-chain topology — single cable runs through all drives
- Deterministic communication — guaranteed cycle time for synchronized multi-axis motion
Applicable Industries:
Automotive assembly lines, packaging machines, printing presses, multi-axis robotics, large-scale material handling
Installation Requirements:
- Mount on DIN rail (35 mm) or panel-mount with screws
- Connect EtherCAT cable in daisy-chain order (first and last device require termination)
- Provide 24 VDC power with <5% ripple
- Ensure network cable is shielded CAT5e or better (max 100 m segment)
Usage Notes:
- Configure via Kollmorgen Workbench software
- Do not mix EtherCAT with standard Ethernet on the same port
- Update firmware when new drive models are added to the network
