Digital guide
You are here:
Kollmorgen DBL3H00130-BR2-000-S40
-
Product Name: DBL Series Brushless Synchronous Servo Motor
-
Product Introduction: High-dynamic brushless servo motor from the legacy Seidel/Kollmorgen DBL family, designed for positioning, rapid acceleration/deceleration and high-throughput motion control.
Detailed content
-
Technical Specifications:
-
Frame Size: 3 (approx. 75 mm flange)
-
Speed Variant: H (rated approx. 6000 min⁻¹ at 230/400 V)
-
Standstill Torque: 1.3 Nm
-
Standstill Current: 1.75 A
-
Rated Voltage: 230/400 VAC
-
Feedback: R2 = 2-pole resolver
-
Brake: B variant code indicates holding brake fitted
-
Shaft: Smooth shaft, no keyway
-
Connections: Angled connectors, B-side orientation
-
Protection: IP64 (IP65 with shaft seal option)
-
Insulation Class: F
-
Thermal Sensor: S40 = thermal contact in feedback connector
-
-
Functional Features: High-energy magnet system, high torque-to-volume ratio, resolver-based commutation, optional holding brake, UL recognized on DBL2–DBL8.
-
Application Scenarios: CNC axes, packaging machines, robotics, material handling, general industrial servo axes.
-
Structure: Aluminum housing, stator/rotor with rare-earth magnets, integral resolver, optional spring-applied brake.
-
Installation Requirements: Match amplifier voltage/current rating; separate power and feedback cables (>20 cm); proper earth bonding; adequate cable cross-section per EN 60204.
-
Usage Notes: Verify brake supply voltage; avoid shaft radial overload; ensure cooling air clearance; resolver alignment required during commissioning.
